Since the zener conducts and regulates voltage in reverse bias, the 5V would bias the zener on with a 4.7V drop. If the 5V source had a low enough impedance, the zener or the source would self destruct.
Most diodes have a forward bias voltage of between 0.6 and 1.4 volts, depending on current. If you were to apply 5 volts across a diode in the forward direction (anode more positive than cathode) you would probably destroy the diode. That's assuming the power supply can handle it - it is also possible that the power supply would perceive a high current condition and engage current limit, blow its own fuse, or be destroyed. If the current limit of the power supply is reached first, then the limiting factor becomes the power rating of the diode, but it is unlikely that you would ever see 5 volts across a functioning diode.
I think you you are asking about varactor diode. varactor means variable capacitor. varactor diode is a p-n junction diode which provide a capacitance across it subjected to applied forward and reverse bias. means it provide variable capacitance which depends on the applied reverse voltage(mostly varactor diode works on reverse voltage).They are also known as varicap
There are two diode ratings. One is the forward current rating, and the other is the reverse breakdown voltage rating. The forward current rating is the maximum current that the diode can conduct before failing, and the reverse breakdown voltage rating is the maximum reverse voltage that can be applied before failing. Of course, the reverse voltage rating has a different meaning in a zener diode, but this answer applies to ordinary diodes.
Current flows in a reverse biased diode because diodes are not ideal. They do have leakage current and a breakdown voltage in reverse, just as they have a breakdown current in forward and a non-linear and non-parallel forward voltage to current curve. It is also possible that you are looking at a zener diode. A zener diode is specifically design to conduct at a certain voltage in reverse.
A zener diode, in the reverse bias condition, presents a higher voltage. The current, however, is a function of the supplying circuit.
The point in the forward operating region of the characteristic curve where conduction starts to increase rapidly is called Knee voltage of a PN Junction Diode.The breakdown voltage of a diode is the minimum reverse voltage to make the diode conduct in reverse.(or) Breakdown voltage is a parameter of a diode that defines the largest reverse voltage that can be applied without causing an exponential increase in the current in the diode.-- Dinakar
Peak reverse voltage of a diode is the maximum reverse bias voltage can be applied to diode which does not cause break down.
A diode will provide saturating current if it reaches its Piv. What it should be well at least 1.5 of the applied reverse voltage. For AC at least 2 times to insure that the peak REVERSE voltage is blocked
reverse voltage applied
I think you you are asking about varactor diode. varactor means variable capacitor. varactor diode is a p-n junction diode which provide a capacitance across it subjected to applied forward and reverse bias. means it provide variable capacitance which depends on the applied reverse voltage(mostly varactor diode works on reverse voltage).They are also known as varicap
the diode when forward biased will conduct and during reverse biased condition(generally doring reverse biased condition ckt is open mens no current flows;when register is connected)current flows but during reverse biased condition 1--for sometimes initially current flows due to discharging of capacitor. 2--then ckt will be having no current
If we give more than 4.8 volt to a diode in reverse bias condition it will break down or destroyed.
A practical diode under reverse-biased conditions, if the applied reverse voltage is less than the breakdown voltage, will offer a high resistance, usually in excess of 10 megohms. In a practical circuit, the diode would appear to be open.
If no forward or reverse bias is applied from outside then the diode or transistor(I'm not sure for which did you ask) is in internal equilibrium. thus there's a field created in each junction which prevents the flow of charges across it..
all most 50Volts when diode is in reverse bias.
The anod terminal of diode is connected with negative and cathod is connected to positive
It is called a varactor or a varicap diode. Its capacitance varies nonlinearly with the reverse voltage applied to its terminals.
A: They are both diodes. The difference lies in the application. A rectifier is used to rectify AC current into pulsating current. The zener diode is used to regulate a voltage source to the zener voltage when connected in the reverse direction. ************************************************************** If you look at the characteristic curves of a rectifier diode and a zener diode, you will see that they are similar, but the reverse curve of the zener has a much sharper bend at what is called the "knee". It is at this point on the zener's curve at which it operates.