20 degree difference
A thermally controlled mixing valve is connected between the hot supply line and the return line, tempering the hot supply with the cooler return water.
Yes, there a difference between three phase and single phase electrical supply services.
The difference between a well and tubewell are the amounts of water they supply. Wells can supply any amount to certain locations like crops. Tubewells involve pumping ground water in specifically measured amounts.
'One stores food and the other keeps your house cool!
in regulated the voltage will be a constant one and can't be variant but is in case of unregulated
There should be appx 15*-20* difference between return and supply air temps measured at the unit (not the registers).
The supply temperature refers to the temperature of the fluid (usually air or water) leaving a heating or cooling system to be distributed to the space being conditioned. The return temperature refers to the temperature of the fluid (air or water) after it has circulated through the system and is returning back to the source. The temperature difference between the supply and return temperatures indicates how effectively the system is heating or cooling the space.
no
no difference...
The difference between individual supply curve and the market supply curve is tat individual supply curve is like a firm. To be able to get the market supply curve you have to have the individual supply curve.
in business
supply function can be defined as the quantity of a good.
The target temperature is 20*. It can vary from that based on conditions, but that is the design.RegardsThe target temperature is 20* difference between the return and the supply air temperature. It can vary from that based on conditions, but that is the design.Regards
we have textbooks
One says individual and the other says market!
check your answer
Size is the difference - both supply 1.5 volts