A voltage error circuit is called an error amplifier and happens when there are discrepancies between the voltage output and the reference voltage. A current error circuit happens when there is a disruption of flow in an ammeter.
Wiki User
∙ 10y agoVoltage attempts to make a current flow, and current will flow if the circuit is complete. It is possible to have voltage without current, but current cannot flow without voltage. The answer is "yes",voltage remains the same as current moves through the circuit.As the voltage remains constant, current increases in the circuit.
In this case current flows from a high voltage to a lower voltage in a circuit.
Voltage leads current or, more specifically current lags voltage, in an inductive circuit. This is because an inductor resists a change in current.
The first thing you need to know is the internal resistance of the current source, the voltage source will have the same internal resistance. Then compute the open circuit voltage of the current source, this will be the voltage of the voltage source. You are now done.
Ohm's law states that the current in a circuit is inversely proportional to the circuit resistance. There is a single path for current in a series circuit. The amount of current is determined by the total resistance of the circuit and the applied voltage.
Voltage = (current) x (resistance) Current = (voltage)/(resistance) Resistance = (voltage)/(current)
An AVR circuit, the voltage sensing unit measures the incoming voltage and compares it to the set point. Then an error signal is produced and sent to the amplifier,the error signal then reaches a firing circuit which consists of a thyristor with a field current which will adjust alternators output current. Dependant on the signal from the actuating unit.
Changing the voltage in a circuit will alter the current flowing through it. According to Ohm's Law, the current is directly proportional to the voltage in the circuit. Increasing the voltage will lead to an increase in current, and vice versa.
Voltage attempts to make a current flow, and current will flow if the circuit is complete. It is possible to have voltage without current, but current cannot flow without voltage. The answer is "yes",voltage remains the same as current moves through the circuit.As the voltage remains constant, current increases in the circuit.
In a series circuit, the current remains constant throughout the circuit. The voltage across each component in a series circuit adds up to the total voltage of the circuit.
In this case current flows from a high voltage to a lower voltage in a circuit.
Voltage = (current) x (resistance) Current = (voltage)/(resistance) Resistance = (voltage)/(current)
Voltage = (current) x (resistance) Current = (voltage)/(resistance) Resistance = (voltage)/(current)
Inductive. Voltage (E) leads current (I) in an inductive (L) circuit and current (I) leads voltage (E) in a capacitive (C) circuit. (ELI the ICEman)
Voltage leads current or, more specifically current lags voltage, in an inductive circuit. This is because an inductor resists a change in current.
The first thing you need to know is the internal resistance of the current source, the voltage source will have the same internal resistance. Then compute the open circuit voltage of the current source, this will be the voltage of the voltage source. You are now done.
Electric current flows when there is a closed circuit with a pathway for electrons to move from a higher voltage point to a lower voltage point. When the circuit is complete, the flow of electrons creates an electric current.