0
Add your answer:
Earn +20 pts
How can you modify the monostable multivibrator to obtain triangular wave generator?
شمدريني
Why does the multimeter show the RMS value of sine wave but not for the triangular wave?
Because your multimeter is not an adequate device for this kind of measurement. Use the correct multimeter to display the triangular wave value.
What is the form factor of triangular wave?
1.15
What is an example of a square wave generator?
A square wave pulse generator is the most commonly used generator. It is mainly used in testing different equipment. It outputs square waves that varies between two levels, with a 50 percent duty cycle.
Why carrier signal are sinusoidal?
It does not have to be. Voltage can be DC, sinusoidal, square wave, triangular wave, etc.
How can we modify the monostablemultivibratorto obtain triangular wave generator?
The monostable provides a square wave, which can be converted into a triangular wave by putting it through an integrator.
How can you modify the monostable multivibrator to obtain triangular wave generator?
شمدريني
Is monostable multivibrator used for wave generation?
how can we modify the monostable multivibrator to obtain triangular wave generator
What is a generic function?
Function generator can better be called as signal generator.It produces different types of signal like sine, saw tooth, triangular, pulse wave forms etc... can be produced.For testing any circuits which input must be a wave form like oscillator circuits function generator is used.
Can transformer operate on triangular wave DC?
If its a triangular wave, its not DC, its AC, its just not sinusoidal. Can a transformer operate on triangular AC? Yes, but not as efficiently as on sinusoidal AC.
What is the fifth harmonic of a 500 Hz triangular wave?
The fifth harmonic of a 500 Hz triangular wave would be at a frequency of 2500 Hz. This means that the fifth harmonic would have a frequency that is five times the fundamental frequency of the triangular wave.
What is the function of a digital generator?
digital generator nothing but square wave generator or astable multivibrator
Why does the multimeter show the RMS value of sine wave but not for the triangular wave?
Because your multimeter is not an adequate device for this kind of measurement. Use the correct multimeter to display the triangular wave value.
What is the form factor of triangular wave?
1.15
Working of function generator?
After powering on the function generator, the output signal needs to be configured to the desired shape. Typically, this means connecting the signal and ground leads to an oscilloscope to check the controls. Adjust the function generator until the output signal is correct, then attach the signal and ground leads from the function generator to the input and ground of the device under test. For some applications, the negative lead of the function generator should attach to a negative input of the device, but usually attaching to ground is sufficient
What is an example of a square wave generator?
A square wave pulse generator is the most commonly used generator. It is mainly used in testing different equipment. It outputs square waves that varies between two levels, with a 50 percent duty cycle.
Why carrier signal are sinusoidal?
It does not have to be. Voltage can be DC, sinusoidal, square wave, triangular wave, etc.
