0
Still curious? Ask our experts.
Chat with our AI personalities
Maxine
Fran
LaoAdd your answer:
Earn +20 pts
The standard unit of eletrical resistance is?
The standard measuring unit for resistance is ohm.
Is the water in the toilet salt water or freash water?
On land fresh, on sailboats salt water.
Why is water pouring out from ac unit?
When the unit cools the air, the water vapor in the air condenses to form water. If the unit is in good repair, the water is piped to a suitable place of disposal, into the ground or into a drain system.
Desalination is not a viable source of producing large amounts of fresh water because of?
Because of the cost, it is much easier to use our fresh water resources.
What is a benefit of desalination technology?
Fresh drinking water
What is the standard unit of measurement used to quantify water pressure?
The standard unit of measurement used to quantify water pressure is pounds per square inch (psi).
Is chlorinated pool water more dense than fresh water?
No, chlorinated pool water is not more dense than fresh water. Both chlorinated pool water and fresh water have a density of approximately 1 g/cm3 at standard temperature and pressure.
What does fresh water weigh per m3?
Fresh water weighs approximately 1000 kilograms per cubic meter (kg/m3) at standard temperature and pressure.
What is the volume of 1000 kg of water?
Fresh, clean, clear, pure, standard water, at standard pressure and temperature, would be 1,000 liters, or 1 cubic meter.
Meter is the standard unit of?
Standard unit of length
The kilogram is the standard unit of?
It is the SI unit (that is, the international standard unit) of mass
What unit do you use for the water consumption?
we call it millilitre. litre is the standard unit which contains 1000 millilitre. it is also called capacity
Is standard units and si units the same?
No.The foot is a standard unit - but of the Imperial system.No.The foot is a standard unit - but of the Imperial system.No.The foot is a standard unit - but of the Imperial system.No.The foot is a standard unit - but of the Imperial system.
What is the standard unit of heat?
The standard unit of heat is the calorie. It is defined as the amount of heat required to raise the temperature of 1 gram of water by 1 degree Celsius. Another commonly used unit is the joule, with 1 calorie equal to 4.184 joules.
Why does saltwater have more density than fresh water?
Saltwater has a higher density than fresh water because the presence of salt particles increases the mass of the water without significantly affecting its volume. This increase in mass per unit volume results in a higher overall density for saltwater compared to fresh water.
Where can one purchase some fresh water?
One may purchase fresh water from supermarkets such as Tesco, Asda, Morrisons, Lidls, Aldi, Waitrose, Sainsburys and Co-Operative. Many stores now sell fresh mineral water, still and sparkling, as standard and even local shops and corner shops have water on offer.
Which standard unit is the same in all systems of units?
The standard unit that is the same in all systems of units is the second, which is the base unit for measuring time.
