silicon low power
One has SL in it name the other has CL plus an S at the end.
General Purpose Medium Power NPN Transistor
The SL100 transistor has a TO-39 case. In the TO-39, the emitter is closest to the tab, and the collector is furthest away from the tab.
i dont know exactly but i like to share what i know.... transistors are named as BC,BD,AF,SL,AC,BL..etc they are different from each other based on the amplification factor,maximum voltage can be applied,breakdown voltages,gain.......... i would make this answer better with reference......
The SL100 is a PNP medium power transistor, suitable for use up to ~100MHz. This can be used in the power amplifier stage, with the output connected to a tuning network/transformer + antenna for AM modulation. It's purpose, if used in this application, is to supply current (usually a voltage amplifier circuit will precede this one) to drive the antenna.
One has SL in it name the other has CL plus an S at the end.
The pin configuration of sl 100 is B C E with ground as the base of the transistor.
General Purpose Medium Power NPN Transistor
function of sl100
No.. only a cord for the "soul sl100" will fit it.
What is the equivalent component to use in place sl100 transistor? ...
S stands for slew and L stands for low frequency... and 100 is the gain of the transistor
It is an npn power transistor
sl100
transistor sl 100n has 3 pins and it is work like a switch. there is metal lead in the above metal surface the nearest pin is emeter and last pin is collector and center pin is base
The SL100 transistor has a TO-39 case. In the TO-39, the emitter is closest to the tab, and the collector is furthest away from the tab.
SL stands for sublingual, which means under the tongue.