0
Metals like copper, silver, gold, iron, etc are examples of ohmic metals.
Another AnswerThere are very few ohmic materials. Ohmic materials are those that obey Ohm's Law, and very few do -which might come as a surprise to many people (Ohm's Law is NOT universal law!)! For a material to obey Ohm's Law, the ratio of voltage to current must remain constant for variations in voltage. Because increasing current causes increasing temperature, the resistance (and, therefore, the ratio of voltage to current) of most materials will change for variations in voltage.
So, an ohmic material must maintain an approximately-constant resistance over a wide range of temperatures -so metals such as copper, silver, gold, etc., do NOT qualify! However, alloys such as constantan (a nickel-copper allow) would qualify as being ohmic.
What else can I help you with?
Is LDR an ohmic conductor?
A Light Dependent Resistor (LDR) is not considered an ohmic conductor. Ohmic conductors follow Ohm's Law, where the current through the material is directly proportional to the voltage across it, resulting in a constant resistance. In contrast, the resistance of an LDR changes with varying light intensity, leading to a non-linear relationship between voltage and current. Thus, its behavior does not conform to ohmic characteristics.
What is the difference between ohmic and non ohmic elements?
An 'ohmic' resistor is one which obeys Ohm's Law. For Ohm's Law to apply, the resistance of a circuit must be constant over the range of incremental voltages applied to it. If the resistance changes over an incremental range of voltages, then it is said to be 'non-ohmic', and it does not obey Ohm's Law.
If you decrease resistance the current will increase or decrease?
It depends on whether the material is ohmic or non-ohmic.If it is ohmic, then it will obey Ohm's Law, and its resistance will remain constant if the current decreases.If, on the other hand, it is non-ohmic, it will not obey Ohm's Law and, if the temperature of the conductor falls (assuming it is a metallic conductor) due to the fall in current, then its resistance will fall too.
When is a material said to be ohmic?
An ohmic material follows Ohm's law, which states that V = I*R. This means that the potential difference in a system is equivalent to the total resistance multiplied by the current running through the system. This relationship, as you might have noticed, is a linear relationship. Most materials are approximately ohmic, however, there are exceptions. The resistance of a system remains mostly the same except at high temperatures, and Ohm's law assumes that materials will not undergo drastic temperature changes or be subjected to very high or low temperatures. However, it is generally a good approximation.Another AnswerIf you conduct and experiment that allows you to plot a graph of current against variations in voltage, and that graph turns out to be a straight line, then the material through which that current is flowing is said to be 'linear' or 'ohmic', which means that it obeys Ohm's Law.In essence, Ohm's Law is true when the ratio of voltage to current is constant for variations in voltage.However, very few materials and electronic devices are 'ohmic'. Repeating the same experiment with most materials will result in a curved-line graph, which tells us that that material/device is 'non-linear' or 'non-ohmic'. So most materials/devices DO NOT obey Ohm's Law. So an argument can be made that Ohm's 'Law' isn't a law at all, but simply describes the behaviour of a limited number of materials.The equation, R = E/I, which is derived from the definition of the ohm, and NOT from Ohm's Law, applies whether Ohm's Law is obeyed or not, as it tells us what the resistance of a material/device is at a particular value of voltage (as opposed to a range of voltages).
What is ohmic decay?
Ohmic decay is the wasting away of dipolar magnetic fields. This decaying takes place over a very long period of time.
What is the example of a non ohmic material?
A common example of a non-ohmic material is a light bulb filament. As the temperature of the filament increases, the resistance also increases, meaning it does not follow Ohm's Law (V = IR) consistently. This non-linearity is due to the change in resistance with temperature.
Example of non -ohmic and ohmic materials?
iron,gold
What are Ohmic and Non - Ohmic conductor?
ohmic ocnductor is a material which obeys ohm's law: i.e. the voltage and current are directly proportional 2 each other anda non-ohmic ocnductor is a material which doesn't obey ohm's law:)
Are human body make of Ohmic material?
No, the human body is not made of Ohmic material. Ohmic materials have a linear current-voltage relationship, which is not typically seen in biological systems like the human body. Biological tissues have complex electrical properties that are not accurately described by Ohmic behavior.
What is the shape of graph of voltage versus current for an ohmic material?
Linear.
What is non ohmic material?
A 'non-ohmic' conductor is one that does not obey Ohm's Law -i.e. the ratio of voltage to current is not constant when the voltage across it varies.
What is an example of an ohmic resistor?
i give the ans why iam asking you
Due to heat would the resistance in non-ohmic material decrease or increase?
Increase
What are non ohmic devices give an example?
non ohmic devices are diodes, LED's, Thermistors, LDR(light dependent resistors, cells in series.
Is Thermistor ohmic or non-ohmic?
no.....thermistors are not ohmic.
How does ohmic heating work and what are its applications in food processing?
Ohmic heating works by passing an electric current through a food material, which generates heat due to the resistance of the material. This heat is then used to pasteurize or cook the food. In food processing, ohmic heating is used for tasks such as sterilization, blanching, and cooking, as it provides rapid and uniform heating without compromising the quality of the food.
What are ohmic and non - ohmic conductors?
ohmic conductor does obey ohm 's law. non ohmic conductor does not obey ohm's law.
