0
Still curious? Ask our experts.
Chat with our AI personalities
Beau
Devin
ProfessorAdd your answer:
Earn +20 pts
Difference between 8031 8051 and 8751 microcontrollers?
Answer It is both 8 bit processors in a 40 pin package but it is not pin compatible, it have almost the same functions but it is very difficult to compare the two because it is not the same family.
What is difference between 8051 and 8951?
umm 1? lol No, seriously, as explained on www.8052.com, the 8052 has twice the RAM of the 8051 (that is 256 Bytes), an additional 16-bit Timer (Timer 2) and more Special Function Registers (SFR) as required for the additional features. The most essential difference is that Timer2 can be used as a Baud rate generator for serial communication.
Who is first invented 8051 microcontroller or 8051 microprocessor?
Intel
Advantages of pic controller over 8051?
Well, honey, a PIC controller typically has a faster execution speed and lower power consumption compared to an 8051. Plus, PIC controllers often have a larger variety of peripherals and are more cost-effective for certain applications. But hey, at the end of the day, it all depends on what you need for your project, so pick your poison wisely.
What is the voltage of 8051 microcontroller?
This question is literally impossible to answer without knowing a specific part number (and manufacturer which is usually easy to determine because it is based off the part number). The 8051 was first used in the IBM type computer as the keyboard controller to send key presses to the CPU. It has since become an architecture that appears in a number of other places. There are several manufacturers that produce low cost and low power microcontrollers based upon the 8051 with other peripherals included in the same package. Because there are numerous 8051 controllers, there is no one standard for connecting them to power for each may design their controller to meet their own design guidelines. Older 8051 microcontrollers usually require a 5 V power supply. Newer 8051 microcontrollers are more likely to require a 3.3 V power supply. The only way to tell is to read the part number off the chip and look up the manufacturer's data sheets for that part number. Fortunately, most data sheets are online these days.
