0
Add your answer:
Earn +20 pts
What is a y12 reinforce steel bar?
It is a deformed round steel bar and has a diameter of 12mm.
If using composite metal floor deck. what will be the spacing of 12mm diameter deformed bars for 7x7 meter concrete slab?
5.33 is the weight of 12mm dia. bars.
What is the per meter weight of a 10mm deformed bar?
0.618
Is plain rebar is banned?
Not to my knowledge. It typically is not used. Instead, deformed bar, bar with ribbing, is utilized for better surface area in which to bond with the concrete in which it is placed.
With concrete reinforcement steel what does Y12 bar mean and what does R10 bar mean?
The numbers refer to the different diameters of the rebar used to reinforce the concrete. R specifies round bar. Y or N specify deformed bar. See below. == * Round mild steelreinforcement bar - R6 R10 R12 R16 R20 R24 R28 R33 * Deformed reinforcement bar - N12 N16 N20 N24 N28 N32 N36 * Stock lengths of reinforcement bar - up to 12 metres * S12 Pool Steel - Mild steel bars (not tempcore) that is very easy to bend by hand * Processed reinforcement bars - custom cut and bent to required needs * Dowel Bars - precut, often galvanised round bars used when one slab joins another * Galvanising - Plain Reinforcement Steel bars can also be supplied galvanised *Deformed Bar was previously called Y-Bar eg: Y12, Y16 but through product improvements the tempcore strength was increased (now 500Mpa) and is now denoted as N-Bar as listed above
What is a y12 reinforce steel bar?
It is a deformed round steel bar and has a diameter of 12mm.
How piece of iron bar of 12mm make one metric tone?
To calculate the weight of an iron bar, you need to know its length. Assuming a standard density of iron, the weight of a 12mm iron bar to be one metric ton would require a length of approximately 82.5 meters. This calculation is based on the volume of the iron bar and its density.
What diameter is a Y12 bar?
12mm
If using composite metal floor deck. what will be the spacing of 12mm diameter deformed bars for 7x7 meter concrete slab?
5.33 is the weight of 12mm dia. bars.
What is a deformed rebar?
Deformed rebar has either indentations or ridges in a regular pattern on the bar surfae.
What is the per meter weight of a 10mm deformed bar?
0.618
12mm re bar bundle how many rods?
12mmx12m 188 bars
How do you measure nominal diameter of deformed bar?
Nominal diameter of deformed bars are specified by standards.Diameter of deformed bar is controlled from test :1. measure the mass w in kg weighted to a precision 0.5 %2. measure the length L in m to a precision 0.5 %The equivalent diameter is nominal diameter of deformed bars and calcolation is by this formula :Diamater = root square of ( 162.13 w / L )
If aluminum bar is cut in half What is the density of each half compared to the original density of the bar?
The density of each half remains the same as the original density of the bar. Cutting the aluminum bar in half does not change the density of the material, as density is an intrinsic property of the material.
How do you ms bar weight calculation?
give me formula for weight in kg 8mm 10mm 12mm 16mm
How many pieces of 12mm re bar is in 1 ton?
Mass per Meter Run in Kg
How many steel bars of 12mm are in one ton?
170 Y12 Bar to the ton at 6000 M long
