0
Add your answer:
Earn +20 pts
What are the reasons that low frequency parameters cannot be Measured in microwaves?
(a) voltage and current readings vary with position along the transmission line, (b) voltage and current are difficult to define in non-TEM transmission lines.
What are the two basic categories of transmission?
The two basic categories of transmission are:High voltage transmission andLow voltage transmission.
Why 22kv 11kv 33kv 132kv 220 kv are standard transmission voltages in transmission lines why not 20kv 10kv etc?
Its just a matter of standard. In my area, for instance, we use 13.2 KV for distribution lines, and 69 KV / 138 KV for transmission lines.
What is the sizes of cable for transmission lines?
336 776 and 795
Engineering FEED study?
In the early stages of a new, or conceptual project, there is a need to define the basic scope, parameters, and economic impact(s).
Why ABCD parameters are called as transmission parameter?
ABCD parameters are called transmission parameters because they describe the relationship between the input and output voltages and currents of a two-port network, which helps in understanding how signals are transmitted through the network. They are used to analyze the transmission characteristics of linear electrical networks.
Why are transmission lines less than 80km considered short?
The transmission lines which have length less than 80 km are generally referred as short transmission lines. For short length, the shunt capacitance of this type of line is neglected and other parameters like electrical resistance and inductor of these short lines are lumped.
What are the fitness parameters?
Fitness Parameters are the parameters on which the exercise program of the individual is decided.You can make your own parameters.( on which areas you want to work)The basic parameters are:1) Frequency2) Intensity3) Duration
What are the basic parameters that forms the bedrock of a recruitment process?
the basic parameters that forms the bedrock of a recruitment process are: job analysis job specification job description job evaluation
What are the reasons that low frequency parameters cannot be Measured in microwaves?
(a) voltage and current readings vary with position along the transmission line, (b) voltage and current are difficult to define in non-TEM transmission lines.
What are the two basic categories of transmission?
The two basic categories of transmission are:High voltage transmission andLow voltage transmission.
Disconnecting transmission lines 96 jeep?
You can disconnect the 1996 Jeep transmission lines with a 9/16 open end wrench. Be prepared for transmission fluid to come out of the transmission lines.
How can you replace the lines that carry transmission fluid to the transmission?
if you are asking about the cooling lines for the transmission that connect to the radiator, its easy. first disconnect the lines from the radiator (2 lines, usually on the bottom opposite the radiator outlet) then disconnect the lines from the transmission. remove the brackets holding them on, then remove.
What is the major material used in constructing transmission lines?
The major material used in the construction of transmission lines is aluminum alloy. Steel is also used to reinforce the lines. No insulation is used for overhead transmission lines.
Where do the vacuum lines run from and to on ford escort automatic transmission?
There are no vacuum lines running to the automatic transmission.
How replace 2000 Jimmy 4x4 transmission cooler lines?
The transmission lines on a 2000 GMC Jimmy 4x4 are replaced by disconnecting the lines at the radiator and then the side of the transmission. They are then removed from the bottom of the vehicle and new lines put in place.
What are the 5 basic parameters of the software cost model?
There are five basic parameters present in the software cost model.1. Size of the end process2. Process to produce end product3. personnel capability4. Environment5. Quality
