a powerful feature of 8051 I/O ports is their capability to access individual bits of the port without altering the rest of the bits in that port. of the four 8051 ports we can access either the entire 8 bits or any single bit without altering the rest
The Pic Controller has many advantages over a 8051. The main advantage is the editing capabilities. Another advantage is the high resolution.
Intel
the 8051 microcontrroller is the name doesnt matter easy or not....but the maiin and imp diff between both is at89s51 represents the 8051 chip no....along with the name of company i.e atmel, so all n all both are same thing ...... 89c51 have RISC architecture and contains less no of opcodes which are easy for programming. so iti is preferred than 8051.
check this link http://www.dnatechindia.com/index.php/Tutorials/8051-Tutorial/Interfacing-ADC0808-To-8051.html
65536 bytes, because the 8051 family has a 16 bit external address buss.
a powerful feature of 8051 I/O ports is their capability to access individual bits of the port without altering the rest of the bits in that port. of the four 8051 ports we can access either the entire 8 bits or any single bit without altering the rest
The Pic Controller has many advantages over a 8051. The main advantage is the editing capabilities. Another advantage is the high resolution.
They are mainly four ports in 8051MC. port 0 port 1 port 2 port 3
agjhsdbnsgcv ydjbiudjdhakkasaik jbjkshxjsxoisx h skxbklhxn;'al shdjdklahdlsd' jskskldhsohjdls
The 8051 can directly interface with a number of I/O. The 8255 just gives you the abilty to access 3 eight bit ports using a minimum number of control bits from the 8051
An 8051 microcontroller is a popular 8-bit microcontroller that was first introduced by Intel in 1980. It is widely used in embedded systems due to its simple architecture, low cost, and ease of use. The 8051 microcontroller typically includes CPU, RAM, ROM, I/O ports, timers, and serial communication interfaces on a single chip.
Intel
because i said so thats why
how many interrupts in 8051
avr is high speed cmpar to 8051.in 8051 there are less number of instructions
the 8051 microcontrroller is the name doesnt matter easy or not....but the maiin and imp diff between both is at89s51 represents the 8051 chip no....along with the name of company i.e atmel, so all n all both are same thing ...... 89c51 have RISC architecture and contains less no of opcodes which are easy for programming. so iti is preferred than 8051.
The Intel 8051 is an 8-bit microcontroller which means that most available operations are limited to 8 bits. There are 3 basic "sizes" of the 8051: Short, Standard, and Extended. The Short and Standard chips are often available in DIP form, but the Extended 8051 models often have a different form factor, and are not "drop-in compatable". All these things are called 8051 because they can all be programmed using 8051 assembly language, and they all share certain features (although the different models all have their own special features). Some of the features that have made the 8051 popular are: * 8-bit data bus * 16-bit address bus * 32 general purpose registers each of 8 bits * 16 bit timers (usually 2, but may have more, or less). * 3 internal and 2 external interrupts. * Bit as well as byte addressable RAM area of 16 bytes. * Four 8-bit ports, (short models have two 8-bit ports). * 16-bit program counter and data pointer 8051 models may also have a number of special, model-specific features, such as UARTs, ADC, OpAmps, etc...