0
Granularity refers to the ratio of actual computation to the amount of communication required by a parallel system.
A fine-grained system will do a small amount of computation before transferring data/results. A coarse-grained system will do a relatively large amount of computation before reporting back.
Still curious? Ask our experts.
Chat with our AI personalities
Lao
Rene
JudyAdd your answer:
Earn +20 pts
Which is the Meaning of coarse grained reconfigurable architecture?
An architecture which is reconfigurable at run time. Its working is based on byte.
What is difference between unc tap and unf tap?
unc is coarse, unf is fine pitch
What is coarse frequency offset?
the frequency difference between the transmitter and the receiver without any noise or distortion
Simple experiment to compare steel and cast iron?
A steel specimen would give a longer or continuous sound when beaten by a hammer. This is due to the malleable nature of the material. In other words, sound takes longer to travel in a coarse-grained material. Whereas cast iron specimen gives sound of shorter duration. This is due to the brittle nature of the material. In other words, sound takes shorter to travel in a fine-grained material.
What is hydraulic conductivity of soil?
This depends on the soil! Cohesionless coarse grained soils with high gravel contents may have high hydraulic conductivity on the order of 1 to 1x10-1 m/s. Mixed sands and gravels are on the order of 1x10-1 to 1x10-3 m/s. Finer sands approximately 1x10-3 to 1x10-4, and fine grained soils such as silty sands may be in the range of 1x10-5 to 1x10-7 m/s. Very fine grained cohesive clay soils have very low hydraulic conductivity values ranging from 1x10-7 to 1x10-13 m/s.
