strobe is enable input in a digital IC...if its made active high...it will be enabled..some IC strobe is active low.. Its function is to enable the operation of the IC..or gate or Mux...
this is connector chip used for asynchronous serial interface and its task is to make voltage level operative for next connected device.it is usually used in pc and microcontroller interface
IC Bus was created in 2002.
In linear IC'S the output voltage is very according to input voltage In digital IC's the output voltage is either high or low
IC stand for Integrated Circuit, so all microcontrollers is IC's but not all IC's is microcontrollers. There is millions of IC types with different porpoises some is microprocessors some is microcontrollers but most IC's has other functions like Oppamps, timers, logic gates, regulator ETC.
IC 7806 is the voltage regulator that gives 6V dc voltage from 230V ac power supply. It is used to give power supply to the IC which operates on 6V.
Because that is the way the chip was designed. No special reason.
IC 7806 have 3 pins. pin1 - in, pin2 - GND, pin3 - out... It provides regulated 6V DC supply...
7806 rounded to nearest thousand is 8000
8000
Because the operation of the transistor is determined by the current at the base. the principle equations of BJT operation are: Ic = h*Ib ,and Ie=Ib+Ic thus device operation is controlled by the input current.
A 7806 would be a +6VDC 3 pin linear voltage regulator. Its partner the 7906 is -6VDC but has a totally different pinout.
The same way they work outside an IC. An integrated circuit is just a means of miniaturization, it does not change circuit operation.
The Young and the Restless - 1973 1-7806 was released on: USA: 26 January 2004
The operation of subtraction is just the inverse of addition, if you can do one you can do the other. BTW, are you thinking analog or digital IC? If digital there are ALU IC chips that do both, depending ..
strobe is enable input in a digital IC...if its made active high...it will be enabled..some IC strobe is active low.. Its function is to enable the operation of the IC..or gate or Mux...
7599 and 7600