It's connected in series with the load.
basic principle of analogue clamp meter
First of all, you are referring to an energy meter, not a wattmeter. A wattmeter measures power, in watts, whereas an energy meter reads energy, in watt hours (or, more specifically, kilowatt hours). The energy company bills you for energy, not power.Having said that, the connections each instrument are the same. In fact, there are two coils inside an energy meter: a current coil, and a voltage (or potential) coil. The current coil is connected in series with the load while the voltage coil is connected in parallel with the supply voltage.The current coil measures the in-phase component of the current drawn by your load, so that the instrument always reads the true power (multiplied by time -the function of the aluminium disc) of the load -i.e. not the apparent power or reactive power.
A: Directly from whatever you are measuring as a Small current to move the coil to indicate current flow. That current can be calibrated to read voltage or current on the meter itself
The Amp meter was design to allow current flow through the meter to measure with a minimal alteration to the original circuit. That is the ideal world, in reality the meter has some resistance and will lower the current flow. The multiple current setting on most meter will reduce the effects caused by the meter but you must be careful not to damage the meter by reading to high for the setting.
A metre is the basic SI unit of length, but is often misspelt as 'meter'. A meter might refer to either a measuring device, e.g. a Volt meter measures the energy possesed by the current in a current in a circuit.
Potential meter is voltage control device and rheostate is current control device. it is a basic difference.
The Aluminium disc in energy meter continues to slowly rotate even if no current is supplied to the current coil . This rotation of the disc is known as creep .
A LT-CT energy meter is a low tension current transformer energy meter designed to measure and record the energy consumption in low voltage electrical systems. It uses a current transformer to step down the current to a level that can be accurately measured by the meter. These meters are commonly used in residential and small commercial applications to monitor electricity usage.
bunny rabits edit : Current usage
It's connected in series with the load.
The four basic quantities of measurements are length (meter), mass (kilogram), time (second), and electric current (ampere).
A meter already is the basic unit.
In some energy meters, the disc rotates slowly and continuously when there is no load.the rotation of disc without any current through current coil and only due to excitation of pressure coil is called creeping.
The basic unit of energy that scientists use is the joule (J). It is equivalent to the energy transferred when a one-newton force acts over one meter distance.
The meter constant represents the number of pulses will generated per hour nothing but after n number of pulses the meter reading is incremented by one.Read more: What_is_the_meter_constant_of_energy_meterAnswerAn energy meter measures the quantity of energy used by an installation. It does this, by monitoring the supply voltage and the in-phase component of the installation's load current.
disadvantage of current meter