0
Add your answer:
Earn +20 pts
Machining of irregular shape on lathe?
You would either need a 4 jaw chuck or a faceplate.
What are the holding devices for lathe?
A chuck is used to hold small cylindrical jobs in a lathe. Various chuck types like 3-, 4- and 6-Jaw self centering chucks or independent 4-Jaw chucks can be used. Some small cylindrical jobs can also be held between two centers on a lathe.
Which lathe chuck can hold the most difficult workpiece shapes?
The 4-Jaw independent chuck. Due to its independent jaws it can grip the most complex shapes. 3-Jaw and 4-Jaw self centering chucks are only capable of gripping cylindrical and hexagonal (3-Jaw self-centering) or cylindrical, square and octagonal (4-Jaw self-centering) shapes.
What would you use to align something in a four jaw chuck on a lathe?
It depends on the surface finish of the workpiece. For machined surface a magnetic base dial indicator is used. For rough or un-machined surfaces a surface gauge is used.
How a work piece held to the lathe machine?
a laithe works by a rotating jaw with ur work in the chuck and u can use many laithe tools to cut difrent things off of your work sick bled dont mention It has a head stock(fixed and is connected to motor) and a tail stock(movable).The tool is moved towards the workpiece (which is driven by motor).Used for making cylindrical sections,tapering,drilling..
What is a 3 jaw chuck on a lathe?
A 3-jaw chuck is the device attached to the spindle of the lathe that clamps and rotates the workpiece for machining. This type of chuck is self-centering which means that the three jaws move in unison at the same diameter when the chuck is opened or closed.
Which is better chuck 3 jaw or 4 jaw for lathe machine?
3 jaw but that is hard because both are good
What is difference of 3-jaw and 4-jaw chuck in lathe machine?
Four jaw. Four directions of the workpiece. Round. Quadrangle. Eight ears ........ Tuesday jaw. It takes three pieces of work. Round. Triangular. Hexagonal .......
What is the difference between the three jaw chuck and the four jaw chuck?
The 3-jaw has three jaws and the 4-jaw has four jaws.
Machining of irregular shape on lathe?
You would either need a 4 jaw chuck or a faceplate.
What are the holding devices for lathe?
A chuck is used to hold small cylindrical jobs in a lathe. Various chuck types like 3-, 4- and 6-Jaw self centering chucks or independent 4-Jaw chucks can be used. Some small cylindrical jobs can also be held between two centers on a lathe.
Which lathe chuck can hold the most difficult workpiece shapes?
The 4-Jaw independent chuck. Due to its independent jaws it can grip the most complex shapes. 3-Jaw and 4-Jaw self centering chucks are only capable of gripping cylindrical and hexagonal (3-Jaw self-centering) or cylindrical, square and octagonal (4-Jaw self-centering) shapes.
Machining methods crankshaft?
I would use a metalworking lathe with a four-jaw chuck mounted on the headstock. You can start with a hunk of metal or from a rough casting.
Who invented the three jaw chuck?
The three jaw-chuck is believed to be discovered by Simon Fairman and Arthur Irving Jacobs. Austin F Cushman is also believed to be a part of the discovery team.
How can a three-jaw chuck be adapted to hold large diameter work?
It can't. You buy a bigger chuck.
What type of drill press chuck should be used with a straight shank twist drill?
A three jaw chuck is usual.
What would you use to align something in a four jaw chuck on a lathe?
It depends on the surface finish of the workpiece. For machined surface a magnetic base dial indicator is used. For rough or un-machined surfaces a surface gauge is used.
