0
In electrical circuits series and parallel are two basic ways of wiring components. The naming comes after the method of attaching components, i.e. one after the other, or next to each other. As a demonstration, consider a very simple circuit consisting of two light bulbs and one 9V battery. If a wire joins the battery to one bulb, to the next bulb, then back to the battery, in one continuous loop, the bulbs are said to be in series. If, on the other hand, each bulb is wired separately to the battery it is wired in a parallel circuit.
Still curious? Ask our experts.
Chat with our AI personalities
Blake
Devin
LaoParallel means exactly across from. These two lines that form an equals sign are parallel: =. Some more examples of parallel items are railroad tracks, all the sides of a square (the left and right are parallel from each other, and the top and bottom are parallel from each other). Hope this helps! : ]
Add your answer:
Earn +20 pts
When the resistor removed from a parallel connection of the circuit whether the resistance increase or decrease?
if we remove a resistor from the parallel connection the effective resistance value will be increased.
What are the characteristics of series connections?
Characteristics of parallel connection.
What is the effect of pump installation in series and parallel connection?
if you connect the pumps in series, it will add head at the same flow rate. Inversely, in parallel connection, double the flow rate at same head.
Which is brighter series or parallel?
Parallel. Coz all the elements will get same voltages from the sources. in case of series connection, the voltage is divided between all elements.
What is the differences between parallel connection and serial connection in water pumps?
Parallel and series connections differ in their connection to the feed line. In parallel, each pump is fed directly from the feed line. This means that the water going into each of the pumps is at exactly the same state and the pumps may be analyzed individually. In series, the water is fed through one pump, then the exit line from that pump leads to inlet of the next and so on. What determines the setup for a specific application is the desired property of water at the exit. Two pumps in parallel connection can produce a higher flow rate. Two pumps in serial connection can produce a higher pressure.
