0
Add your answer:
Earn +20 pts
What is a non-hunting gear ratio?
a ratio where each tooth to tooth contact is different each time. one tooth does not contact the same tooth more than once per revolution
What is a zero bevel gears?
Zerol bevel gearsare very similar to a bevel gear only exception is the teeth are curved: the ends of each tooth are coplanar with the axis, but the middle of each tooth is swept circumferentially around the gear.
What is the shape of the tooth of spur gear?
The shape is known as an involute the shape is analogous to unwinding a piece of string from a spool representing the base circle diameter of the gear, imagine your pencil at the end of the string and the string kept tight during unwinding, unwind until line meets OD of gear, then apply blend radius at base circle, then mirror about tooth centre line for full tooth profile.
How does a gear train work?
A number of gears grouped into a single unit is called 'gear train'.If two gear's in mesh eg, a drive gear and a driven gear also constitute a gear train which are called simple gear train and in the simplest form.simple gear train may have more than two gear's.compound,epicyclic,reverted are some other types of gear train's.
What is the powerful gear?
Reverse gear
Does an idler gear change the speed of the driver gear?
No. But if there are two idler gears, one smaller than the other, say a 12 tooth and a 6 tooth. the 12 tooth idler is the idler of the driver gear which has 24 teeth, making the idler gear rotate 2 times for every rotation that the driver gear rotates. Now, if the 12 tooth idler gear is rotating 2 times faster than the driver gear, then the 6 tooth idler gear will rotate 2 times faster than the 12 tooth idler gear. So, the 6 tooth idler gear is rotating 4 times faster than the driver gear. Let's say that the driven gear has 12 teeth. For every rotation of the 6 toothed idler gear, the driven gear rotates halfway.
What is the tooth on a wheel called?
A tooth on a wheel gear is called a cog.
Will a 9 tooth freewheel work with a 22 tooth sprocket?
they don't make a 9 tooth freewheel they make a 9 tooth cassette and its better to get a 8 tooth as you can see heres a gear ratio for you to look atPopular Gear CombosSprocketF/W or Cassette2282382592810301133123613391441154416
determine the speed of rotation of a 20 tooth gear when it is driven by a 40 tooth gear and rotating at 10 rpm?
i am the one that asked i dont know the answer
How do you calculate a gear ratio of a 9 tooth Drive gear?
Number of teeth on driven gear divided by teeth on driven gear.
Why gear has teeth?
Gear are generally circular, with tooth. The number of tooth and their form are more important than is originally obvious.To provide technical benefits, getting in touch with gears have different variety of tooth.
Is tooth an adverb?
No, it is not. The word tooth is a noun, which can be used as a noun adjunct, as in tooth decay or tooth fairy. The verb (to tooth) means to add teeth to a tool or gear.
How do you calculate a gear ratio of a 5 tooth drive gear and a 15 tooth driven gear?
You take driven divided by drive. 15 divided by 5 is 3. So the ratio would be 3:1
Why does a 1983 Honda CT110 chatter in third gear only third gear at any speed up shift or down?
Third gear could have a broken tooth, chipped tooth or bent tooth on the gear and only makes a noise when it has drive pressure applied to it, so either way when pressure is applied it makes a noise.
How is a clock a gear?
It is round it has 60 points on it just like a gear has points at the top of each tooth
Why not cycloidal gears used instead of involute gears in all places?
as it is known there two types of gear tooth available. but only the involute gear tooth is used in every place. This is because the cycloidal gear tooth do not allow any tolerances for centre distance between the gears. It is has to be very exact for the cycloidal gears to mesh properly. but the involute gears allow certain degree of change in centre distance hence the involute gear tooth is used always.
What is a non-hunting gear ratio?
a ratio where each tooth to tooth contact is different each time. one tooth does not contact the same tooth more than once per revolution
