0
A vacuum-tube circuit in which the input signal is applied between the control grid and ground, and the load is connected between the cathode and ground. Also known as grounded-anode amplifier; grounded-plate amplifier. It has a VERY high input impedance, and a low output impedance. Both properties have useful applications.
Its equivalent in solid state is the emitter follower.
Add your answer:
Earn +20 pts
Ray of radiation traveling from the cathode to the anode?
Cathode Ray
What is the negatively charged electrode of a cathode ray tube?
The negatively charged electrode of a cathode ray tube (CRT) is the cathode. The tube is a cathode ray tube, and electrons stream off the cathode, are accelerated across the evacuated space and "directed" either electromagnetically or electrostatically, and then strike the phosphor coating on the positively charged anode at a "location" determined by the "directing" elements.
Cathode rays were shown to be a stream of?
Cathode rays are electrons.
Stream of particles originating from a cathode?
Those are electrons.
In cathode ray tube cathode and anode rays travel opposite to each other but they are not neutralized. why?
There is no such thing as anode rays. The cathode rays (aka electron beam) just travels from cathode to anode.
What are the differences between Emitter follower and source follower?
no difference between emiter follower and source follower
What is a Christian's follower?
A christian IS a follower, of Jesus. it's not "a christian's follower" it's a christian follower (of jesus).
What is common cathode?
has common cathode
What is meaning of perforated cathode?
The. Cathode plate consists of small holes known as perforated cathode plate
Where does reduction occur in an electrochemical cell?
The cathode.
Difference between direct and indirect cathode ray?
In a directly heated cathode, the filament is the cathode and emits the electrons. In an indirectly heated cathode, the filament or heater heats a separate metal cathode electrode which emits the electrons.
In the cathode ray tube where do the particles originate?
In a cathode ray tube (CRT), the particles, which are electrons, originate at the heated cathode, becoming the so-called cathode rays. The electrons stream off the cathode and rush over to the anode.
What is the charge of the particle in cathode rays?
The charge of the particle in cathode rays is negative. This was determined by J.J. Thomson through his experiments with cathode ray tubes in the late 19th century, which led to the discovery of the electron.
Why cathode rays are negatively charged?
Cathode rays are negatively charged because they are composed of electrons, which have a negative charge. When a high voltage is applied to the cathode in a vacuum tube, electrons are emitted from the cathode and accelerated towards the anode, creating a beam of negatively charged particles known as cathode rays.
Ray of radiation traveling from the cathode to the anode?
Cathode Ray
What is the negatively charged electrode of a cathode ray tube?
The negatively charged electrode of a cathode ray tube (CRT) is the cathode. The tube is a cathode ray tube, and electrons stream off the cathode, are accelerated across the evacuated space and "directed" either electromagnetically or electrostatically, and then strike the phosphor coating on the positively charged anode at a "location" determined by the "directing" elements.
What following piece of equipment was used by jj Thomson to find electrons?
J.J. Thomson used a cathode ray tube to discover electrons. By passing an electric current through the tube, he observed the deflection of a beam of electrons, which led to his conclusion about the existence of electrons.
