0
What else can I help you with?
Loading effect in RC coupled amplifier?
Loading of Rc coupled amplifier occurs, if you doesnt use coupling capacitors...... If avoiding input coupling capacitor the amplifier will load the function generator.. For more details go to http://mycircuits9.blogspot.com
Bear the load or bare the load?
Bear the load. Bare the load would be to uncover the load...
What is difference between impact load and sudden load?
sudden load differ from impact load by the velocity of loading
How many types of load cell?
I think there are 4 types of load cells they are Pancake Load CellS ,Beam Load CellLoad, ButtonSingle and Point Load Cell.
What are the two types of floor load a building is subjected to?
dead load and live load dead load is the load of weight that is on the floor that is part of the construction of the house live load is the weight you add to it as in people furniture etc,
What are Ac load lines in an amplifier and how they are drawn?
The dc load resistance is Rc but the AC Load resistance is (RcRl). If a load line is drawn the slope of which is -1(Rc Rl) . Then it is called an AC load line and it is to be used when the transistor is operating as an amplifier.
What is working of low pass RC circuit?
Its function is to filter the voltage across the load.
Loading effect in RC coupled amplifier?
Loading of Rc coupled amplifier occurs, if you doesnt use coupling capacitors...... If avoiding input coupling capacitor the amplifier will load the function generator.. For more details go to http://mycircuits9.blogspot.com
What dc load line?
well, this is very simple to understand ,the DC load line of a circuit is nothing but the Kirchoff's voltage law on the out put circuit of the transistor-amplifier. As the KVL is linear equation involving voltage drops the equation of load line is a straight linelet us assume that the transistor is in CE configuration.VCC-VCE-ICRC=0vICRC=VCC-VCE of the form by=aX+c which is in the form of a straight line with positive intercepts on X(VCC) and Y(VCC / RC) axis and a negative slopewhere,x= VCE/RCy= ICm(slope)= -VCC/RC
How can you apply displacement controlled load with eccentricity on RC columns working inside ansys?
Use a enforced displacement boundary condition. Use a lot of substeps and force/moment reaction probes to know when you're at the load(s) you want. A free body diagram should tell you that.
Bear the load or bare the load?
Bear the load. Bare the load would be to uncover the load...
Define moment of load?
THE PRODUCT OF LOAD AND LOAD ARM IS CALLED MOMENT OF LOAD.
What is a live load?
Live load is a load on the object other than the load from itself.
What is an RC filter for a ripple?
Place a capacitor across the output or load and you have your filter. This assumes that your load is a resistor. The capacitor you use depends on the frequency of the ripple. Lower frequencies require larger capacitors. A resistor may be required to make sure you do not damage any of the electronics either in series with the capacitor or immediately after the power source.
What is the future tense of load?
"Will load" is the future tense of load.
What is distance load?
Load distance is the distance you have to bring your load up an inclined plane.
What is noncontinuous load?
A continuous load is a constant load. A noncontinuous load is one that varies over time.
