The main caused of component failure especially electronic part is power surging or spikes to best protect the parts is to install a good power surge protector.
Surge suppressor, as name suggests suppresses and regulates the voltage and makes the power constant in a case of a spike or surge. While a protector simply detects the surge and turns the unit off. Suppressor is good for things like computers, where you don't want to keep turning on and off.
To limit the fault current used surge protective resistance in generator rotor winding to protect the rotor winding heavy damage.
High resistance means insulation
When stranded conductor is being used for earthing, It offers some reactance in addition to the resistance of the conductor. Since any kind of surge is of sudden in nature, and reactance opposes the change in flow of current (Property of Inductor), It might disturb the discharge rate of the surge. Hence the conductor is flat inorder to provide only the resistance
Reactivation of a surge protector is normally not necessary if your protector has taken a hit. Typically a protector will continue to work without the ned to reactivate it.
It will very likely damage the surge protector
a surge suppressor or protector protects your equipment from spikes on the electrical line.
A surge protector, Apex. :D
Possibly, but that's kind of missing the whole point of a surge protector. The surge protector exists to protect the things that are plugged into it. If you're not using those devices anyway during the storm, sure, go ahead and unplug the surge protector... but you could also have just unplugged the devices themselves from the wall and not bought a surge protector in the first place. Also, storms don't directly damage surge protectors. Stopping surges damages surge protectors. If there's no surge, it doesn't matter if the surge protector is plugged in or not.
If your surge protector is still supplying power, it should still be fine. Surge protectors have two separate ways of preventing surges, semiconductors act as variable resistors to prevent smaller surges (which can be cause by things as simple as refrigerators and air conditioners, anything high voltage), and a fuse that breaks to protect from surges the semiconductors cannot handle. If the surge protector is still supplying power, the fuse is still intact, and your surge protector is fine.
The function of an APC surge protector, or any surge protector is to protect your electric goods from electrical surges. One could find more information on their website, if further information is required.
If the fuse in a surge protector is blown it will not resume operation unless the fust is replaced.
I'd be a good idea, but it isn't necessary. On the off chance that there is a power surge and the surge protector on your house doesn't work it will protect it.
A surge protector making noise could indicate that it is overloaded or has a faulty component. Unplug some devices to see if the noise stops, and if not, consider replacing the surge protector to prevent potential safety hazards.
I dont think it protects the system, it just keeps your computer for blowing up when there is a power surge. What the surge protector does is it takes "the hit" from the surge and that fries instead of the computer.
When looking for a quality surge protector you should consider the clamping voltage, response time, the energy absorption and dissipation rating, as well as the warranty. Two surge protector that come highly rated in those categories include the APC and Belkin Surge Protectors.