Wiki User
∙ 6y agoWant this question answered?
Be notified when an answer is posted
In the circuit where the DC motor is added, it was not specified whether the motor was added in series or in parallel to circuit elements. If it was added in series, it will increase circuit resistance and it will cause circuit current to go down. In parallel, the motor will reduce total circuit resistance, and circuit current will increase.
The reduction of voltage or the increase of resistance will reduce the current in a circuit.
The total resistance of the circuit increases. hence the new resistance after adding the resistance will be new resistance = old resistance + added Resistance There is a small mistake in the question. The second word is 'changes' not 'charges'
The total current decreases.According to the Ohm's law the current & the resistance are inversely proportional so when we put a load in series with the existing load, the resistance of the circuit increases therefor the current decreases.
Assuming the new lamp is in series, the ammeter reading falls because the total resistance has increased. By how much depends on how the lamp resistance depends on voltage. If the lamp is added in parallel to the first, then the ammeter reading doubles.
extra resistance is added in order to decrease starting current and improve starting torque
The resistance is increased, the voltage across each bulb is decreased and the current through the circuit is reduced.
When more light bulbs are added in parallel to a circuit, the total resistance of the circuit decreases. This is because in a parallel circuit, the reciprocal of the total resistance is equal to the sum of the reciprocals of the individual resistances. More paths for current to flow mean less overall resistance in the circuit.
You raise the total resistance by that amount if added in series to a circuit. If you add them in parallel to a circuit then that total resistance will be less than the total of the added circuit.
Adding more branches to a parallel circuit decreases the overall resistance of the circuit. This leads to an increase in the total current flowing through the circuit as each branch provides an additional pathway for the current to flow. This results in a decrease in the total resistance and an increase in the overall current of the circuit.
Resistance in a series circuit is added by simply connecting resistors end-to-end. This results in the total resistance being the sum of the individual resistances. The current passing through each resistor in a series circuit remains the same.
When more light bulbs are added to a parallel circuit, the total resistance decreases because each additional bulb provides an additional pathway for current to flow. This results in an increase in the overall current flowing through the circuit, as well as an increase in the total power consumed by the circuit.
In the circuit where the DC motor is added, it was not specified whether the motor was added in series or in parallel to circuit elements. If it was added in series, it will increase circuit resistance and it will cause circuit current to go down. In parallel, the motor will reduce total circuit resistance, and circuit current will increase.
If you add more loads to a series circuit, the overall resistance in the circuit increases, which decreases the overall current flowing through the circuit. This can result in a decrease in the brightness of light bulbs or a decrease in the speed of motors connected in the circuit.
Does it? See Related Links
When you have multiple loads in a series, the resistance of the loads is added together allowing very little current to flow through the circuit to power any of the loads, making for a low amperage circuit. If you have your loads in parellel, the resistance of the loads in the circuit is subtracted which allows more current to flow, making for a high amperage circuit.
The reduction of voltage or the increase of resistance will reduce the current in a circuit.