Planetary gears can be spur or helical gears.
Six gears, one down five up.
Gears working together can be a simple machine in themselvesA Gear Train is a complex machine made up of wheel, axles and gears
Spur gears have straight teeth while helical gears have curved teeth. Generally, helical gears are usually quieter and smoother in operation, while spur gears are easier to make and much less expensive.Helical gears are stronger than spur gears.
Changing the gears on a lathe enables it to cut certain pitches of threads.
3.31 or a 3.55 are good all around gears.
the backing plate on the rearend has to come off and there are C -clips that you have to pull out of each axle where they mesh with the gears inside the rearend and then you can pull the axles out.
it depends on how much the car wieghs and what rearend gears are in it and what rmp u shift gears in it
take all the bolts out of the rearend pumpkin cover and you will see the rearend gears, push the axle inwards and you will see a C clip that holds it in place inside the rearend, pull the C clip out and then you can pull the axle out.
Not knowing your tire size I would say you have 3:73 gears
there are 5 gears
It depends on your rearend gears and transmission type. I have a 364CI with 410 gears and a 4 speed auto and depending on my use I get 8 to 14 MPG.
Yes but the gears have to be changed
plug on pumpkin on front of rear end on passenger side
Yes some came stock with 3.55 gears
if you let me know what the 4:11 came out of I could help the 4:11 just means the gear ratio not what it will fit if you are asking can you put a set of 4:11 gears in your stock rearend the answer is yes as long as you get them for that rearend hope this helps
there should be a tag screwed into the bolts on the rearend differential cover that says what the gears are. They are all different depending on whether or not you have the towing package