0
To throttle the medium being used as a globe is NOT a positive shut off
A globe valve is a type of valve used for regulating flow in a pipeline, consisting of a movable disk-type element and a stationary ring seat in a generally spherical body.
For example, globe valves or valves with a similar mechanism may be used as sampling valves, which are normally shut except when liquid samples are being taken. Since the baffle restricts flow, they're not recommended where full, unobstructed flow is required.
Still curious? Ask our experts.
Chat with our AI personalities
Fran
Coach
Judy
Add your answer:
Earn +20 pts
Can a globe valve be uses as a blowdown valve?
HECK NO READ the ASME code or the NBBI Also read up on valves and what they are designed to do. A "Globe" valve is used for THROTTLING and severely restricts flow Personally I like using a GATE valve in combination with a ball valve for Blow down applications
How you will identify the gate valve and globe valve practically?
globe valve. With a spherical valve is closed. Valves can be closed with a round handle.
Which valve is prefered to use for ammonia tanks a globe valve or a gate valve?
If the purpose of the valve is to modulate flow, a globe valve is preferable. If the valve is only on-off, a gate valve is preferable because of lower pressure drop when the valve is open. As wikipedia , A globe valve is a type of valve used for regulating flow in a pipeline, consisting of a movable disk-type element and a stationary ring seat in a generally spherical body. So i think it is a globe valve to use in steam pipeline.
What is the difference between a globe valve and a ball valve?
The Globe valves are generally used to control the flow rate and ball valve used for open /close purpose only.A globe valve is a type of valve used for regulating flow in a pipeline, consisting of a movable disk-type element and a stationary ring seat in a generally spherical body.A ball valve is a valve with a spherical disc, the part of the valve which controls the flow through it.
What is the difference between gate valve and globe valve?
The external housing (shell) of gate and globe valves are similar, but the globe valve is designed to serve as a regulating valve, meaning that it can adjust the flow by the percentage of the opening. However, the gate valve is not designed to regulate flow, but to stop the flow. A gate valve should always be either fully open or fully closed. The main difference is in the form of the inner elements and the form of the flow inside the valves. In addition, the gate valve may have a rising or non rising stem while the globe valve is typically a rising stem design. The direction of flow through a gate valve is not important. However a globe valve has a flow direction indicated on the outer shell (body) which indicates the direction of flow from beneath the seat. In a gate valve, the closure element is a plate or disk which travels parallel to the plane of the seat. The gate in a dam is a well known example. In a globe valve, the closure element is usually called a "poppet", and it travels perpendicular to the plane of the seat. There are specific advantages and disadvantages to each type depending on the application. The application for a globe valve is regulating flow. It is not well suited for full stop isolation. The gate valve is an isolation valve and not designed to regulate flow.
