Wiki User
∙ 14y agoThey will dim because you have more resistance in the circuit. More resistance means less current which means less light. The power is P=V*I = I/R*I = I²/R
Think of blowing through one straw. Now attach a second straw end on with no leaks between joints and then attach a third straw in a long line. Which one is the easiest to blow?
Wiki User
∙ 14y agoThe bulb is dim.Because,the voltage is drops in series connection so you add more bulbs in series the last bulb got low voltage that reason for the bulb is dim
The brightness of three bulb would be mare than one
Overall brightness (not individual bulbs' brightness) will increase when we connect them in parallel & it will decrease when we connect them in series.
the brightness of the bulbs would decrease because the cell would have to supply more power.
All the bulbs will go out. In a series circuit, the current at all points is the same. This is Kirchoff's Current Law. If you loosen or remove a bulb in a series circuit, the current at that bulb becomes zero, and by Kirchoff's Current Law, the current in every part of the circuit also becomes zero.
In a parallel circuit, each bulb receives the full voltage of the power source, so all bulbs shine at their full brightness. In a series circuit, the brightness of each bulb decreases as more bulbs are added because the voltage is shared among all bulbs.
Adding another bulb in series will increase the total resistance in the circuit, causing the current to decrease. As the current decreases, the brightness of both bulbs will decrease since they will receive less power.
The bulb is dim.Because,the voltage is drops in series connection so you add more bulbs in series the last bulb got low voltage that reason for the bulb is dim
If they have the same resistance they will. Kirchhoff's' Law.
As a series circuit, as asked, all bulbs will go off because of that just one bulb.
Bulbs in a parallel circuit draw the same amount of current, so each will display the same brightness. Bulbs in a series circuit share the current so all bulbs will appear dimmer.
The brightness would remain constant but the power draw will increase. If the circuit was series wired, the brightness would go down as you added bulbs.
The brightness of three bulb would be mare than one
In a parallel circuit, as more bulbs are added, the overall brightness of the bulbs remains constant. This is because each bulb gets the full voltage of the circuit and operates independently of the other bulbs. The individual brightness of each bulb may decrease slightly due to the increased current draw, but the overall brightness of the circuit remains fairly consistent.
Overall brightness (not individual bulbs' brightness) will increase when we connect them in parallel & it will decrease when we connect them in series.
Yes you would use a serial circuit You would use parallel circuit lights for a Christmas tree because if you used series circuit lights, and one of the bulb blows, the rest of the bulbs will go out. But with parallel circuit lights, if one bulb blows the rest of the bulbs will remain their brightness.
The voltage in a series circuit is divided among the bulbs, so as more bulbs are added in series, each bulb receives less voltage. This causes the brightness of each bulb to decrease compared to when fewer bulbs are present.