0.5amp
1.5
Ohm's Law: voltage is current times resistance, so 8 amps times 2 ohms is 16 volts.
The voltage of a circuit with a resistance of 250 ohms and a current of 0.95 amps is 237.5 volts. Ohms's law: Voltage = Current times Resistance
The formula you are looking for is R = E/I
The series resistance is 4 x 50 = 200 Ohms. You would need additional information to get the current; usually this is calculated from the voltage. current = voltage / resistance.The series resistance is 4 x 50 = 200 Ohms. You would need additional information to get the current; usually this is calculated from the voltage. current = voltage / resistance.The series resistance is 4 x 50 = 200 Ohms. You would need additional information to get the current; usually this is calculated from the voltage. current = voltage / resistance.The series resistance is 4 x 50 = 200 Ohms. You would need additional information to get the current; usually this is calculated from the voltage. current = voltage / resistance.
Ohm's Law: Resistance = Voltage divided by Current 40 volts divided by 5 amperes = 8 ohms.
A circuit has an applied voltage of 100 volts and a resistance of 1000 ohms. The current flow in the circuit is 100v/1000ohms which would equal .1.
0.2 volts
Ohm's Law: Current = Voltage divided by resistance 9 volts divided by 3 ohms = 3 amperes.
10 volts applied to 5 ohms would cause a current flow of 2 amperes. Current = voltage divided by resistance.
A resistor's resistance is measured in ohms. The higher the resistance the less current will flow with a constant voltage applied across the resistor. In terms of Ohm's Law Voltage = Current x Resistance.
Electrical resistance is opposition to electric current flow. There is a resistance to the flow of current. And a "balance" between applied voltage and resistance determines how much current will flow in a circuit. For a given applied voltage, if we increase the resistance, the current flow will decrease. For that same applied voltage, if we decrease the resistance, the current flow will increase. It's a simple relationship, and it is set down by the following expression: E = I x R We can also write it as I = E / R and R = E / I Voltage (in volts) is E, current (in amps) is I, and resistance (in ohms) is R. In the first expression, voltage is equal to current times resistance. For a constant voltage, any increase in resistance will cause a decrease in current flow. And any decrease in resistance will cause in increase in current flow. Just as cited earlier.
Voltage = Current * Resistance Current = Voltage / Resistance 2.5ma = 10v / 4K
Very basically, simply divide the voltage by the amperage. Thsi is not for calculating Ohms of resistance, just Ohms. For example, a 9 volt battery that delivers 3 amps has 3 ohms. To calculate ohms of resistance we use the ohms law. This measures the difference in current flow in amps (amps/current is amount or volume of flow, volts is power pushing that current, sort of) and voltage. For instance, measure the amps and voltage at the source and record the ohms. Then record the same at the end point the difference in ohms is ohms of resistance. So, if we measure 10 volts and 2 amps at the source we have 5 ohms. at the end point we have 8 volts and 1 amp we have 8 ohms. therefore we have 13 ohms of resistance. 1 Determine current. Current is the flow of electricity measured in amps. For example a current has four amps in the circuit. 2 Determine voltage. Voltage is the difference in electrical potential from two points, measured in volts. For example, there is two-hundred volts in a circuit. 3 Divide voltage by current to calculate resistance. Resistance is measured in ohms. In the example, two-hundred volts divided by four amps equals fifty ohms. 4 To get ohms of resistance, measure the end point. at the endpoint we have 100 volts and 2 amps=50 ohms. therefore we have 100 ohms of resistance
Ohm's Law: voltage is current times resistance, so 8 amps times 2 ohms is 16 volts.
Ohms law states that E=I * R, or voltage equals current times resistance. Therefore current equals voltage divided by resistance. 120v divided by 16 ohms equals 7.5 amps.
The three electrical quantities are current voltage and resistance. Current is measured in amperes (A) and is the rate at which electricity flows through a conductor. Voltage is measured in volts (V) and is the electrical force pushing the current through the conductor. Resistance is measured in ohms () and is the opposition to the flow of current. Current - measured in amperes (A) Voltage - measured in volts (V) Resistance - measured in ohms ()
Google Ohms Law. It will give you all the formulas you need to compute Ohms,Volts and Amps. Simple formulas :-)