Increases the total resistance
Increasing resistance decreases current.
This depends on the type of conductor. If the conductor has a positive coefficient the resistance will increase. If the conductor has a negative temperature coefficient the resistance will decrease.
Ohm's Law says that Voltage = Current x Resistance (Load). Therefore Current = Voltage / Resistance and as resistance decreases current increases and as resistance increases current decreases.
power=i square*resistance or power=v suare/resistance
It decreases
if the resistance is decreased and the current stays the same, then the power decreases.
the current will increase because of a lower level of resistance , hence more current will flow- easily
When frequency increases, power decreases due to the skin effect and proximity effect. These effects cause current to flow closer to the surface of the conductor at higher frequencies, increasing the effective resistance. This increased resistance leads to power losses in the form of heat, reducing the overall power transmitted.
Increases the total resistance
Increasing resistance decreases current.
Increasing resistance decreases current.
First, this statement stands as long as voltage is constant. If you held the current constant then power would increase as resistance increases.V=IR. For a fixed voltage if you increase the resistance (R) then the current (I) will decrease - following the formula.Power = VI so as the resistance increases the value of VI (power) decreases as V is constant and I gets smaller.Therefore the power is decreasing as the resistance increases (when voltage is held constant).Hope this helps.
This depends on the type of conductor. If the conductor has a positive coefficient the resistance will increase. If the conductor has a negative temperature coefficient the resistance will decrease.
Ohm's Law says that Voltage = Current x Resistance (Load). Therefore Current = Voltage / Resistance and as resistance decreases current increases and as resistance increases current decreases.
output resistance decreases and input resistance increases
it increases