0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is Difference between mild steel and high yield strength deformed steel?
Mild steel (grade A36) has a minimum yield of 36,000 psi. A572 grade 50 has a minimum yield of 50,000 psi.
What is modulus of elasticity of mild steel in inches?
Modulus is given in pounds per square inch (psi). For steel it is 30,000,000 psi
What is Value for shear modulus of steel?
it is 30,000 Ksi or 3 x 10 E6 psi or 207000MPa
What is the young modulus of 1045 steel?
(30)(10)^6 psi
What is the pressure rating for Schedule 10 steel pipe?
The fittings THREADED are normally rated for 125 PSI but there are ratings over 3,000 PSI if needed such as high pressure steam applications Then one has to take temperature /pressure relationship into consideration higher temperature greater pressure
How much psi does it take to crush a car?
To crush a small to mid size car it takes roughly 2300 psi. If you want to crush a big truck, SUV, or bigger vehicle you will need more than 2400 psi.
How much psi can a wolf jaw exert?
The wolf jaw can produce 3,200 psi pressure which inables it to crush bones and such.
How much pressure does it take to crush a can of pop?
It typically takes about 90 pounds per square inch (psi) of pressure to crush an aluminum can. This pressure is exerted evenly on all sides of the can, causing it to collapse.
How much psi can a stock civic take?
5-10 psi
How much psi does it take to kill someone?
a lot
How much pressure does it take to break the hymen?
50 psi
What is Difference between mild steel and high yield strength deformed steel?
Mild steel (grade A36) has a minimum yield of 36,000 psi. A572 grade 50 has a minimum yield of 50,000 psi.
Young modulus for 1018 steel?
30,000,000 psi
What is modulus of elasticity of mild steel in inches?
Modulus is given in pounds per square inch (psi). For steel it is 30,000,000 psi
How much psi does it take to stop a 50 cal bullet?
8550psi
What is the tensile strength of 304 stainless compared to carbon steel?
304 strength ranges from 80,000 psi to 250,000 psi, depending on degree of cold work. Standard carbon steel strength is less than 80,000 psi.
Psi to crush an empty pop can?
It would generally require around 4,000 pounds per square inch (psi) of force to crush an empty pop can. This force is needed to overcome the structural integrity of the can and compress it.
