0
Generator output voltage is determined by the number of windings, strength of magnetic flux and the speed the flux crosses the windings. With the flux and windings remaining the same, a larger unit will have higher voltage than a smaller one. There is no single answer to this question.
Add your answer:
Earn +20 pts
How much current is drawn by a120v circut containing 1500 w load?
The equation you are looking for is I = W/E. Amps = Watts/Volts.
What is the voltage rating of a resistor having power of 1500W?
There are zero volts in 1500 watts. Watts are the product of amps times volts. Without a voltage or amperage stated, an answer can not be given. W = Amps x Volts.
What is the imput voltage 1500 turns primary 750 turns secondary output 120 volts?
240 volts - the turns ratio of this transformer is 2:1, thus the primary voltage will be two times the secondary voltage.
How many watts of power are consumed in a circuit with an applied voltage of 60 volts and a load of 150 ohms?
The formula for this question is I=P/E Where I = Current P = Watts E = Volts Therefore applying this formula: I = 1500 / 120 = 12.5
Will 1500 watts work on 220 volts?
Using the formula I = W/E, the current of the circuit will be 6.8 amps. As long as the wire is at least a #14 and is protected by a 15 amp two pole breaker There will be no problem. Just make sure that the specifications on the 1500 watt device clearly show that the voltage range is 220 - 240 volts. It certainly can, but it would depend on the fuse rating and existing load on the circuit.
What does 1500 watts equal in amps at 120 volts?
To convert watts to amps at 120 volts, use the formula: Amps = Watts / Volts. For 1500 watts at 120 volts, the calculation would be: 1500 watts / 120 volts = 12.5 amps.
How many volts does a tEaser gun have?
1500
How many ac amps is a 1500 watts?
To convert watts to amps, you can use the formula: Amps = Watts / Volts. Assuming a standard voltage of 120V, 1500 watts would be equivalent to 12.5 amps (1500 watts / 120 volts = 12.5 amps).
What amp breaker do you need for 1500 watts at 120volts?
To calculate the amperage needed for 1500 watts at 120 volts, use the formula: Amps = Watts / Volts. In this case, it would be 1500 watts / 120 volts = 12.5 amps. Therefore, you would need a 15 amp breaker for this circuit to accommodate the power load safely.
Can you run one 1500 watt heater on a 125V- 15A 60Hz power strip?
Yes, a 1500 watt heater operating on 120 volts has an amperage of A = W/V. Amps = Watts/Volts = 1500/120 = 12.5 amps. It is not a recommended practice to do so.
How many volts for a fuel pump dodge 1500 5.9?
standard 12.0 V
Where is the starter located on a 2002 Chevy silverado 1500?
Its a hand crank protruding from the front. When winding be careful not to dislocate your thumbs
What does trouble code p0138 on 2001 dodge 1500 mean?
Downstream O2 sensor circuit volts high.Downstream O2 sensor circuit volts high.
How many amps in a 1500 mccullough generator?
To determine the amperage of a generator, you will need to know the output voltage as well. Once you have that information, you can use the formula: Amperage = Watts / Voltage. For example, if the 1500 watt McCullough generator outputs 120 volts, then the amperage would be 12.5 amps (1500 watts / 120 volts).
Charging device that requires 100-240 volts ac to produce 29 5 volts dc 1500 ma can you use a 12volt dc inverter to make this work?
It should work just fine, first you jack up your car voltage to 120 AC, and then drop it to 29.5 volts DC Except for losses, it should be draining about 44 watts, or about 3 and 2/3 amps from your battery
What size breaker for a 1500 watt 120 volt heater?
To calculate the breaker size for a 1500-watt 120-volt heater, use the formula: Breaker size = Power (Watts) / Volts. In this case, 1500 watts / 120 volts = 12.5 amps. Therefore, you would need a 15-amp breaker for a 1500-watt 120-volt heater to allow for a safety margin.
How many amps does 1500 watts equal?
It all depends on the supply voltage. In the UK the supply voltage is 240V therefore the amps would be 1500w/240v = 6.25A. In the USA (with a supply of 110v) the amps would be 1500w/110v = 13.64A. All you need to remember is the formula 'amps = watts/voltage'
