answersLogoWhite

0


Best Answer

It depends on the humidity, warmth, and other factors such as air movement and brand of sealer.

It'll be tough enough to walk on with sock feet in 24-48 hours. Most typical cure to maximum hardness are 3-5 days with constant air movement.

Only a pro can tell you for sure.

User Avatar

Wiki User

16y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How long does it take to cure a polyurethane coating on a concrete floor?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How long should a concrete garage floor cure before applying epoxy coating?

If you're dealing with a new slab, you must wait a minimum of 28 days, preferably two months, for the floor to cure and dry thoroughly before applying a garage floor coating.


Do you need to etch the existing epoxy floor before you apply the new epoxy paint?

Etching only benefits bare concrete floors. If you want to ensure that your new coating will adhere to your old coating, blend enough of the epoxy to cover a single square foot section, let it cure for a week, then check the adhesion by scoring a cross-hatch design in the new coating, put some duct tape across the scored area, then quickly pull up the tape. If the epoxy comes up, then you will have to remove the old coating prior to recoating the floor.


What is the difference between a polyurethane PU coating and a thermoplastic polyurethane TPU coating?

Polyurethane (PU) coating is a rigid and durable material commonly used for waterproofing and protection, while thermoplastic polyurethane (TPU) coating is flexible and elastic, often used for impact resistance and shock absorption. TPU coatings are more abrasion-resistant and provide better flexibility compared to traditional PU coatings.


When is green concrete considered cure?

28 days is the usual cure time for structural concrete. For street pavements and driveways made with 6-Sack concrete, 3 days of cure will support a car, but 7 to 10 days is required for it to support trucks. All concrete continues to cure forever, as long as moisture is present.


How long does gypcrete need to cure before you can tile floor?

7 to 10 days.Method of testing:Duct tape plastic film to a 12"x12" place on the floor and if the plastic does not have any condensation and the concrete does not appear darker there after 24 hours, the concrete is dry enough. You can over spray it (seal it up), next day put flooring down.


How does concrete cure?

what is the purpose of reinforcing bars in a spread footing


What are some tips on floor refinishing?

The first step of wood floor refinishing is sanding off the current finish. Make sure your flooring hasn't already been sanded too many times, or it may need to be replaced entirely. Start with a very coarse sandpaper and gradually move toward finer grits. Only apply one coat of the wood stain, or some parts of the flooring may absorb more stain and your finish will be uneven. The final step is applying the polyurethane coating. Coat several times and allow it to cure for 3 to 7 days before replacing furniture.


Is there a method used to shorten the time it takes to cure concrete?

Yes and many so ask the supplier of your concrete.


Are fumes from polyurethane floors dangerous?

Yes, fumes from newly installed polyurethane floors can be harmful to health, as they can contain volatile organic compounds (VOCs) that can cause respiratory irritation and other health problems. It is important to ventilate the area well and allow the floors to fully cure before re-entering the space.


Will dry concrete cure in a below ground hole from ground moisture transfer?

Yes.


Will concrete cure normally if covered with soil after 24 hours?

no, not normally. It will cure more slowly and how much slower depends on how much dirt is piled on it.


What temperature does concrete need to be to harden?

all things that need to dry are based on 72 degrees concrete needs 30 days to fully cure.