answersLogoWhite

0

Press the X button when you are in front of it (Xbox 360)

User Avatar

Wiki User

14y ago

Still curious? Ask our experts.

Chat with our AI personalities

ViviVivi
Your ride-or-die bestie who's seen you through every high and low.
Chat with Vivi
MaxineMaxine
I respect you enough to keep it real.
Chat with Maxine
SteveSteve
Knowledge is a journey, you know? We'll get there.
Chat with Steve

Add your answer:

Earn +20 pts
Q: How do you open doors in left 4 dead?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Engineering

How much space should there be between the bottom of a newly installed door and an existing floor?

The real answer is the least amount that still allows the door to swing fully open and still clear all obstacles. OR the same distance as is common with the other doors in the home OR The easy answer is 1/4" to 3/8" for interior doors


How do you program a Mazda 6 remote?

Step 1: Open drivers door and leave open. Step 2: Lock and unlock the drivers door using the power door lock switch on the door. Step 3: Insert key into the ignition. Step 4: Turn key to on position and return to off position. (IMPORTANT - use ON position NOT ACC position). Do this 3 times within 10 seconds. Leave key in the ignition. Step 5: Open and close the drivers door 3 times. (Door should be left open after this step). *Instead of opening/closing door 3 times, you can press the button in door jam. The car will think you're opening and closing door but much easier! Step 6: ECU should respond by locking and unlocking the doors. Step 7: Press any button on remote #1 twice. ECU responds by locking and unlocking the car doors. Step 8: Press any button on remote #2 twice (etc.) Each time the ECU will respond by locking & unlocking the doors. Step 9: Remove the key from the ignition and the ECU will respond a final time with a series of door locks and unlocks. You're done!


How does the ball valve open and close?

1/4 Turn


What array shows factors of18?

2 on top and bottom 4 in the middle on right and left


How o create hex file using visual studio and others softwares?

follow the steps : 1.go to "File" 2.go to "open---------->>>file" 3.paste your file name and don't press enter but simply click on "open------->>>> open with" 4.then chose "binary editor" 5.here you got a hex file. by : UMAR HASHMI