I found that the Pipe Friendly Tape Measure by tekforce is far more accurate and cuts the hassle.
Commercial or residential and what manufacturer
Ribbed, bendable steel pipe used on combustion engine exhaust system.
With a tape measure.
Thermal expansion.An exhaust pipe gets up to 600 degrees or more. The coefficient of expansion of steel is 8 millionths of an inch per inch per degree. a 12 foot exhaust increasing (and decreasing) in temperature by 500 degrees will expand overall a little more than 1/2 inch. If the pipe were mounted solidly the mounting bracket would eventually break, or the pipe would break, from the strain put on it by the expansion.
Why not just walk outside and measure it yourself? You will then have your answer.
Unburned fuel in the exhaust system causes the backfire from the exhaust pipe.
In the exhaust pipe, near the engine.In the exhaust pipe, near the engine.
In the exhaust pipe, at the back of the engine.In the exhaust pipe, at the back of the engine.
It is in the exhaust pipe on the back of the engine.It is in the exhaust pipe on the back of the engine.
To reduce the noise created by the exhaust gases.
The tail pipe is part of the exhaust system.
is it possible to cut your exhaust pipe to make it louder is it possible to cut your exhaust pipe to make it louder
In the exhaust pipe at the front of the catalytic converter.In the exhaust pipe at the front of the catalytic converter.
Unblock the exhaust pipe, start it up and go.
Screwed into the exhaust pipe, just behind the engine.Screwed into the exhaust pipe, just behind the engine.
The exhaust pipe was leaking.