16 Ohms. Yes 16 ohms in series. 4 ohms in parallel
There is no single standard. Many computer speakers are rated at 8 ohms while others are 16 ohms or higher. My computer subwoofer here is 4 ohms.
Multiply by 1000. 1K ohm = 1000 ohms
The answer is .047Megohms. 1kilo ohm is 1,000 ohms. 1mega ohm is 1,000,000 ohms. Just move the decimal over to convert.
Though it is tempting to say the difference is 2 ohms (8 ohms minus 2 ohms equals 6 ohms), lets look at some things. The 6 ohms is 3/4ths the resistance of the 8 ohms. If the resistances are loads, the 6 ohm load will draw 1/3rd more current than the 8 ohm load. The 8 ohm load will draw 3/4ths as much as the 6 ohm load. Those are some differences between 6 ohms and 8 ohms.
Yes It all in how there wired up
It has to do with the load on the amplifier, you can't hear the difference.
16 Ohms. Yes 16 ohms in series. 4 ohms in parallel
A Megohm is one million ohms. To convert ohms to Megohms, divide by one million.
The nominal 8 inch speaker impedance can be 4 ohms, 8 ohms or 16 ohms. It depends on the make of the loudspeaker not on the 8 inches.
That is possibly the input impedance of a loudspeaker - not an impedance of an amplifier.
Use 5.2 ohms, which is the closest to 8 ohms.
There is no amplifier with an output impedance of 8 ohms or 4 ohms on the market. All audio amplifiers really have an output impedance of less than 0.1 ohms. Scroll down to related links and look at "Amplifiers, loudspeakers and ohms"
The wattage and ohms of a speaker are not related; the resistance for speakers is usually 4 or 8 ohms.
Car stereos are designed for 4-8 ohms loads unbridged (8 ohms bridged). So wire it for 4 ohms. If you use a separate amp for the speaker then refer to the amp's documentation - most are designed to operate with standard 4 ohms unbridged and may also have provision for 2 ohms unbridged (or 4 ohms bridged).
There is no single standard. Many computer speakers are rated at 8 ohms while others are 16 ohms or higher. My computer subwoofer here is 4 ohms.
this is range of 4 ohms resistance in an electrical device. Ohms is a measure of resistance in electrical qualities. Circuits and devices are rated , or measured for there resistance in ohms to meet a designed electrical need. Is this related to a speaker?