Wiki User
∙ 11y agoWant this question answered?
Be notified when an answer is posted
You will need about a bag of cement for this project. You will also need around 0.15 cu.m of sand.
#include <stdlib.h> int myrand() { double d = rand() / RAND_MAX; /* (0,1] */ return d * 2001 - 1000 + 0.5; /* [-1000,+1000] */ }
Typically 1000 cubic feet per minute (per linear running foot of the perimeter at the glass line) of air at a static pressure of 4 inches of water column if the requirement is only for the sidewalls. so for a 6 meter by 14 meter furnace the perimeter would be slightly less than 40 meters (131 feet) so the installed cooling would be 131000 CFM (2 blowers of 65000 CFM) If the crown too is to be cooled a safer calculation would be 1950 cubic feet per minute. It is a trade off. More cooling will give a better life but a lower energy efficiency.
900 + 100 = 1000
Multiply by 1000. 1K ohm = 1000 ohms
1000 ft
Devils Tower is 1000 feet wide
Approximately 200,000 gallons of water are required to generate 1000 kWh of electricity from coal. This water is used primarily for cooling purposes in coal-fired power plants.
Its the height of the tower, not the size that determines pressure.
$1000
1000 feet high (300 meter)
nothing
1000 feet high (300 meter)
The Eiffel Tower is 300 meters tall or 984 feet tall.
It is 950/1000: you can simplify the fraction if required.
At least 1000 tourists a day.
Yes I read this in a travel book once.