In long shunt the shunt field winding is in parallel to both generator and series field. In short shunt the shunt field is in parallel to generator only.
aster
the basic difference is ,in short shunt motor the series field winding wont carry any current under no load condition whereas in long shunt motors series winding will carry no load current.....
.The magnitude of the voltage and current of both the armature and shunt field coil. To decrease the speed when the load is increasing then increase the shunt field current while decreasing the armature voltage or current. To increase the speed while the load is increasing then increase the armature current while decreasing the shunt field current. The decreasing and increasing of these currents and voltages can be done by connecting a variable resistor in series or parallel with each of the armature and/or shunt field coil.
It could be anything, it depends on the design of the motor and whether it is a high-power or a low-power motor.
series field in series with the armature shunt in parallel with the voltage supply the shut field increases the strength of the magnetic field with heavy loads to reverse the motors direction the fields remain the same you swap the armature leads
In long shunt the shunt field winding is in parallel to both generator and series field. In short shunt the shunt field is in parallel to generator only.
shunt field winding have more resistance than series field winding ************sai ganesh ************269*******
A series motor respond by decreasing its speed with small increase in current for a given load torque. A shunt motor holds its speed nearly constant with large increase in input current for same amount of load torque
aster
A shunt dc motor has quite different characteristics from a series motor. Wired in series, the same current passes through the armature and the field winding and it is most unlikely that a shunt motor would have a field winding that is suitable for this. Therefore a shunt motor cannot be wired as a series motor in general because its field winding is designed for only a small current.
This depends on how the motor and wiring. You'll need to provide more information. Series / compound / shunt / differential / self or separately excited / is the rheostat in parallel or series to the field / is the rheostat on the shunt field or series field (if compound)
A series motor is one in which the field windings are in series with the armature windings. So the torque is proportional to the square of the supply current.'Shunt' is an archaic term for 'parallel'. So a shunt motor is one in which the field winding is in parallel with the armature windings. So the torque is proportional to the supply current.
A shunt DC motor connects the armature and field windings in parallel or shunt with a common D.C. power source. This type of motor has good speed regulation even as the load varies, but does not have the starting torque of a series DC motor
the basic difference is ,in short shunt motor the series field winding wont carry any current under no load condition whereas in long shunt motors series winding will carry no load current.....
series controller, shunt controller,series-shunt controller,series-series controller
1. In Shunt generators armature current is equal to sum of field current and load current whereas in series generators field current and load current is same. 2. Shunt generators field winding has high resistance and large no of turns as compared to series generators. 3. Shunt generator field winding has thin conductor and series generator has thick.