answersLogoWhite

0


Best Answer

A car engine

User Avatar

Wiki User

13y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Examples of a pulley and belt system?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Is a fan belt a inclined plane wedge screw pulley wheel and axle or lever?

A fan belt is a type of pulley system.


How conveyor belt head pulley works?

A Conveyor belt's head pulley is also known as the drive pulley, its on this end of a conveyor system where the motorized pulley is installed. At this point the conveyed material is discharged "wherever" and the belt wraps around and begins its return cycle. The head pulley is at the discharge so that the conveyed material is "pulled" through the system vs. having the tail pulley motorized which would be forcing the system to "push" the belt containing the conveyed material.


What powers the water pump of a car?

The water pump is turned via pulley/belt system which is attached via belt to the crankshaft pulley.


Why is a timing belt like a belt and pulley?

It is not like a belt and pulley. A timing belt is a belt and it fits on a pulley.


What are variables for a pulley?

Some variables for a pulley system include the radius of the pulley, the force applied to the pulley, the tension in the rope or belt, and the acceleration of the system. Each of these variables can affect how the pulley system functions and can be used to calculate mechanical advantage or efficiency.


How do you change the serpentine belt on a 2003 Pontiac Bonneville?

To change the serpentine belt on a 2003 Pontiac Bonneville, loosen the tensioner pulley and remove the old belt. The tensioner pulley is the wheel in the belt system that has a bolt through the middle in a slot that can be adjusted. Put the new belt on and tighten up the pulley.


Examples of a pulley system?

A flagpole, a well bucket, and a crane are all examples of pulley systems. Pulleys are used to lift and move objects by reducing the amount of force needed to do so.


What is Slack side in a belt pulley?

It is the top side of belt drive system having less tension in horizontal arrangement.


What does the idler pulley on a Jeep 4.0L connect to on the motor?

The idler pulley is a unit connected to the engine via a brace or bracket. This part merely routs the belt in a certain direction and, if bad, will cause a failure of the total serpentine system or cause belt wear as with any bad pulley in the system.


What are 2 examples of a pulley?

A fixed pulley, where the pulley is attached to a support and only changes the direction of the force applied. And a movable pulley, where the pulley is attached to the object being moved and reduces the effort required to lift the load.


WHAT PULLEY DO I loosen to get single drive belt on?

If you are referring to the Serpentine belt, you loosen no pulley. You simply remove tension from the belt. The tension is applied by the Idler Pulley. Pry the idler back and remove the belt.If you are referring to the Serpentine belt, you loosen no pulley. You simply remove tension from the belt. The tension is applied by the Idler Pulley. Pry the idler back and remove the belt.


What kind or a simple machines is a fan belt in a car?

A fan belt is a type of simple machine that uses the pulley system. That is how the belt gets turned by the wheels.