No. Power is constant. Transformers neither increase nor decrease power, except for minor losses. They increase or decrease voltage, and they decrease or increase current, but the product of voltage and current, i.e. power, remains the same.
No. In an amplifier, Power Out > Power in. In a transformer Power Out ~= Power In (minus internal losses). An AC generator is more like an amplifier than a transformer.
Transformer Inductance?
Voltage Tarnsformer transforms only voltage. While power transformer transforms both voltage and current.
No! A transformer changes voltage levels, not power levels. In fact, the output power of a transformer is actually a little lower than its input power, due to the efficiency of a transformer.
Because the transformer designer does not know the power factors of the different loads that might be connected to it. The way round this probem is to specify the voltage and the maximum current that the transformer can supply, then multply them together and print the VA, kVA or MVA rating on the transformer. Then it's up to the user to comply with this rating to avoid damaging the transformer.
ideal transformer is that which has no power losses.if any transformer transfer power to secondary without power loss then that call a ideal transformer
No. In an amplifier, Power Out > Power in. In a transformer Power Out ~= Power In (minus internal losses). An AC generator is more like an amplifier than a transformer.
A power transformer is used to provide power (to your home, for example), an instrument transformer is used to measure voltage or current (for metering, for example).
You cannot 'change' the 'rated power' of a transformer except by changing the transformer for another one. You can, though, operate the transformer below its rated power or, for short periods of time, operate the transformer aboveits rated power.
ideal transformer is that which has no power losses.if any transformer transfer power to secondary without power loss then that call a ideal transformer
rectifier transformer converts acinto dc.but,power transformer convert step up or step down ac energy without changing frequency
Transformer Inductance?
B.I.L. stands for Basic Impulse Level for the transformer. It should be on the faceplate of the transformer.
Adams Power Plant Transformer House was created in 1895.
It isn't! A transformer operating at no load has a very low power factor.
The inductance of the transformer is much higher than the resistance of the transformer, resulting in very low real power losses (in watts), but some reactive power (vars).
Knowing the power rating of a transformer will help an operator use the transformer within its design limitations with regard to heating of the windings and their insulation.