0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is the difference between cement and grout?
Grout is a substance that is used to fill gaps between tiles, such as in a shower or bathroom. Grout may be made of small aggregate, sand, and Portland cement. It may also be made of Portland cement or masonry cement and sand. There are many different types of cement, and these are usually used as an ingredient with which to make concrete and mortar.
What is the difference between sanded and non-sanded grout?
The obvious answer is sanded grout has sand. But the in depth answer has many differences. Sanded grout which is the most common, can be used in a grout joint from 1/8" to 1/2" (and larger but check the grout). Sanded grout scratches many tile like glass. Non sanded grout can only be used on joints 1/8" or less. Non sanded grout is typically seen on marble and granite tile, many wall tile, and all glass tile.
Can you use unsanded grout for a tile floor?
Yes, you can use unsanded grout for floor tile but you'd only want to use it if the grout lines were 1/8" wide or less - like for granite or marble tiles.If using those, be sure you have a pefectly flat surface.ANSWER:You never want to use sanded grout with marble. If the marble has to be restored or re-polished for any reason the sand in the grout with act like sandpaper on the stone.
Is tile and grout toxic?
Grout is not toxic. Grout sealers and adhesives can be toxic but not the grout itself. Tami Barker www.mosaicforms.com Mosaic Art Instructor and Creator
Can the color of grout be changed?
Yes, you can change the color of the grout. There are products that you can use to try to die the grout or you can just have your tile re-grouted.
How do you make grout?
Grout is little more than a mixture of sand and cement. To make grout, add just a little bit of sand to a bucket of cement. Mix it it a creamy paste. If you add too much sand, it will be too hard to stir.
What is the water ratio with sand and grout?
The water ratio for mixing sand and grout varies depending on the specific type and brand of grout being used. Typically, it is recommended to follow the manufacturer's instructions on the packaging for the correct water-to-grout ratio to achieve the desired consistency for your project. It is important to mix the grout thoroughly to ensure proper hydration and strength of the final product.
What is the sand and cement ratio for grout bottom in pools?
7 Parts sand to 1 Part portland cement
What happens when sand is not added to masonry grout?
The sand acts the same as the rocks & gravel in concrete, they add strength, volume and keep the chalky grout product from crushing. No sanded groud should be used on polished stone with very narrow groutlines, but sand must be added for wider grout joints or the product will lack volume, be chalky and crack.
Why should you not sand grout?
Two answers here: Grout should be sanded to add strength, just like you add rocks & gravel to cement to make concrete stronger. Grout wears off a little every day & IF the flooring has a very shiny surface, polished anything is very soft, like sandstone, Travertine, Coral or marble The sand in the grout is much harder than the stone & the released bits of sand from the grout will actually scar & scratch & dull the shiny polished surface as the traffic grinds it into the floor. The installation of the wet, sanded grout can also start the delustering process. Very narrow joint up to about 1/4" are usually considered to be safe to do without sand, but over that, an aggregate is needed & sand is the ideal.
Is soft sand building sand?
Soft sand is not building sand. Both soft sand and building sand are types of sand and are used in building.Building sand is courser than soft sand.what he is trying to say here is although soft sand isn't specifically called building sand it is still used in many sand made structures
What is a tile grout ingredients?
If the question is "WHAT" is Cement, Sand, water & if you want color then some Pigments
What is the difference between cement and grout?
Grout is a substance that is used to fill gaps between tiles, such as in a shower or bathroom. Grout may be made of small aggregate, sand, and Portland cement. It may also be made of Portland cement or masonry cement and sand. There are many different types of cement, and these are usually used as an ingredient with which to make concrete and mortar.
What is the difference between sanded and non-sanded grout?
The obvious answer is sanded grout has sand. But the in depth answer has many differences. Sanded grout which is the most common, can be used in a grout joint from 1/8" to 1/2" (and larger but check the grout). Sanded grout scratches many tile like glass. Non sanded grout can only be used on joints 1/8" or less. Non sanded grout is typically seen on marble and granite tile, many wall tile, and all glass tile.
How much sand do you need?
For what? Building a cove for a vinyl liner. Adding sand to a sand filter. Building a sand box. For the base of a pool. ????
What is grout poisoning?
Grout poisoning occurs when someone ingests or inhales grout, which is a mixture used to fill gaps between tiles. It contains potentially toxic substances such as cement, sand, and chemicals that can cause health issues if consumed. Symptoms of grout poisoning may include nausea, vomiting, diarrhea, and respiratory problems.
What is mixed with sand for building buildings?
Concrete is used for building buildings and it is a mixture of sand, water and cement.
