voltage! measured in volts. current X resistance = voltage simple ohms law
200 amps is equal to zero kva. To answer this question a voltage is needed.
Milli amps is a measure of current whilst watt is a measure of power. The missing element is voltage as the formula is:- Power = Voltage * Amps ie power in Watts is the product of Volts (in Volts) times Amps (in Amps)
If you have 14 watts, you have 14 watts of power. We measure electromotive force (EMF), which is commonly called voltage, in volts. EMF (voltage) is the force that will drive electron current flow, which is measured in amps. Simply put, power is current times voltage, or, said another way, watts is amps times volts. If you have 14 watts, you could have 14 amps at 1 volt, 7 amps at 2 volts, 2 amps at 7 volts, or any other combination of current and voltage with a product of 14. You may have picked up that because watts is amps times volts, we can say that a watt is a volt-amp. Extending that thinking, 14 watts is 14 volt-amps. There is no way to write 14 watts in volts, at least not without having a bit more information.
When a dc supply is connected to a resistor, current flows. The current in amps is equal to the supply voltage divided by the resistance in ohms. The power used is the voltage times the current, and that appears as heat in the resistor, which might become hot to touch.
Power, in 'watts'.
voltage! measured in volts. current X resistance = voltage simple ohms law
If you know the voltage you can calculate the amps. . Ampere I = power P / voltage V .
To calculate amps, you need to know the voltage of the circuit. The formula to convert watts to amps is Amps = Watts / Volts. If the voltage is 120V, then 1200 watts would be equal to 10 amps (1200 watts / 120 volts = 10 amps).
The power is voltage times amperage or amperage = power divided by voltage. If I asume that there are 120 volts I get: 1400 watts / 120 volts = 11.67 amps So 12 amps is close to equal 1400 watts.
To calculate watts, you need both amps and volts. If we assume a standard voltage of 120V in the US, then 16 amps would be equal to 1920 watts (16 amps x 120 volts).
No, the current is equal to the power (watts) divided by the voltage, based on the formula: current = power / voltage. Voltage divided by watts does not equal current.
watts = amps (times) voltage watts (divided by) voltage = amps 140 (div by) 120 = 1.66 140 (div by) 125 = 1.12
Voltage.
To answer this question the voltage of the generator must be given.
That depends on circuit voltage. 1 watt is equal to 1 volt times 1 amp.
It equals zero without a voltage.