If you cant get the existing flooring up, or if lifting it would cause more damage to the substrate then its worth, then yes i would suggest doing this and it is common practice.
Answer from Choices (http://www.choicesflooring.com.au/vinyl/) Generally, cushion vinyl is laid loosely so any imperfections in the floor don't show through over time. It can also be glued down, but the flooring needs to be completely level. Vinyl tiles or planks are glued down so the surface needs to be completely level, which is done by applying a self- leveler to the floor if required.
a good quality vinyl well looked after should last over 20+ years
No, parquet has been known to buckle because he moisture in the cement has nowhere to escape too.
Yes but you may want to apply a leveling compound between the two vinyls and also take care to make sure the original vinyl is well stuck otherwise they will both end up coming off the floor.
The engineered flooring can be either floated above or glued to the concrete.
If you cant get the existing flooring up, or if lifting it would cause more damage to the substrate then its worth, then yes i would suggest doing this and it is common practice.
It depends on the type of floor that you are putting down the vinyl flooring on top of. If it is concrete, then make sure it is clean, dry and repair any cracks or holes. If the old vinyl flooring is in good repair then just put the new vinyl flooring over it or use an embossing leveler for slightly worn vinyl flooring. If the old vinyl flooring is in very poor shape remove it completely. Plywood underlayment can be used for other types of flooring that you will put new vinyl flooring down on top of.
The engineered flooring can be either floated above or glued to the concrete.
Absolutely.
Only if the vinyl was previously installed over concrete, and has a positive bond. Scar the finish of the vinyl with a hand sander (course paper), and use a high strength thinset for the installation.
Vinyl flooring is becoming increasingly popular with homeowners, with sales reaching record highs. This is because vinyl flooring has unique advantages. It's not difficult to introduce and keep up with, is durable, and gives an agreeable surface to stroll on. Vinyl flooring can also be laid over plywood, concrete, or hardwood. Additionally, it can be installed over existing vinyl plank tile; however, there are better ideas than this if you already have two or more layers. The wear layer of some vinyl products even comes with warranties of up to 15 years. The time it lasts depends on the material's quality, just like it does with any other flooring. FOR MORE INFORMATION VISIT ON OUR site: buytilesandmore
Only if the vinyl was previously installed over concrete, and has a positive bond. Scar the finish of the vinyl with a hand sander (course paper), and use a high strength thinset for the installation.
Probably but you REALLY want to get that in writing from the vendor's Tech Service department
yes.
Answer from Choices (http://www.choicesflooring.com.au/vinyl/) Generally, cushion vinyl is laid loosely so any imperfections in the floor don't show through over time. It can also be glued down, but the flooring needs to be completely level. Vinyl tiles or planks are glued down so the surface needs to be completely level, which is done by applying a self- leveler to the floor if required.
yes - of course