0
A electric heater works by passing a current of 100 A through a coiled metal wire making it red hot if the resistance of the wire is 1.1 ohms what voltage must be applied to it?
Wiki User
∙ 8y ago
Volts = Amps * ohms
110 = 100*1.1
Thus the voltage was 110 Volts.
Wiki User
∙ 8y ago
Add your answer:
Earn +20 pts
What is a current-carrying wire?
A wire with some resistance and a voltage applied to it The amount of current I passing this wire is V/R
In a parallel ac circuit is the current additive?
Yes In parallel circuit , current entering into the circuit will be divided intodifferent paths ( resistances) . Amount of current flow depends upon the magnitude of resistance applied in the circuit. Total current after passing through the circuit will be the sum of all current through each resistance.
Can heating devices be made by passing an electric current through a conductor of high resistance low resistance high conductivity low conductivity?
Heating is caused by current flow. Certain types of wire like tungsten emit more heat than other types. Lower resistance means higher current for a fixed voltage per Ohm's Law. So the efficiency of heating with electricity depends on the material of the conductor, the operating voltage and the resulting current. In most instances this will be a low resistance with high conductivity.
Are there any materials that undergo strong contraction when an electric current is introduced?
Yes, all piezoelectric materials exhibit the reverse piezoelectric effect. A piezoelectric material is one that generates an electric field or electric potential in response to applied mechanical stress. Therefore, in the reverse case, passing an electric current through the material or an electric potential across the material, will cause it to contract or elongate, depending on the direction of the current. One of the best example of this is lead zirconate titanate which will contract/elongate up to about 0.1% of the original dimensions.
Why multimeter cannot used for measurement of insulation resistance?
Because ordinary ohmmeters are calibrated to measure a range of resistance values that are significantly lower than the resistance of insulation. It should also be realised that we usually test insulation resistance while subjecting the insulation to a high electric field, which a normal ohmmeter is incapable of producing.
What wires carry current?
A wire with some resistance and a voltage applied to it The amount of current I passing this wire is V/R
What is a carrying wire?
A wire with some resistance and a voltage applied to it The amount of current I passing this wire is V/R
What is a current-carrying wire?
A wire with some resistance and a voltage applied to it The amount of current I passing this wire is V/R
What can be inferred about the current passing through the bulb?
The current passing through the bulb is directly related to the voltage applied across it and the resistance of the bulb. Using Ohm's Law (I = V/R), we can calculate the current flowing through the bulb by knowing the voltage and resistance values. Additionally, the brightness of the bulb can also be an indicator of the current passing through it, as higher current typically results in a brighter bulb.
In a parallel ac circuit is the current additive?
Yes In parallel circuit , current entering into the circuit will be divided intodifferent paths ( resistances) . Amount of current flow depends upon the magnitude of resistance applied in the circuit. Total current after passing through the circuit will be the sum of all current through each resistance.
Why do wires turn hot in a circut?
Wires turn hot in a circuit due to the resistance they provide to the flow of electric current. This resistance causes energy to be converted into heat as the current passes through the wire. The higher the current flowing through the wire, the more heat is generated.
Do toasters work because of the heating effect of an electric current?
Yes, toasters work by passing electric current through resistance coils inside them, which generates heat due to the resistance of the coils. This heat toasts the bread placed inside the toaster.
What is the amount of electric energy supplied if the current and voltage are doubled?
If both current and voltage are doubled, the amount of electric energy supplied will increase by a factor of 4. This is because energy is proportional to the square of the voltage and current (Energy = Voltage x Current x Time). So, doubling both voltage and current results in four times the original energy supplied.
What is main reason of electric shocking?
Current passing through a part of the body, resulting from a voltage difference applied to 2 points on the body. Electric current passing through the body can greatly interfere with the functioning of muscles and nerves, because it's exactly what they use in the process of their normal functions, but much much greater.
What will an electric current always follow?
An electric current will always follow the path of least resistance, meaning it will flow through materials that offer the least opposition to the flow of electrons. This is determined by the conductivity and resistivity of the materials through which the current is passing.
What are electromagents?
Magnets that are turned on by passing an electric current through them, and turned off by not allowing an electric current through them.
How does an electric cooker use electromagnetic induction?
An electric cooker uses electromagnetic induction by passing an alternating current through a coil of wire in the cooktop. This creates an oscillating magnetic field, which induces an electric current in the cookware placed on top of the cooktop. The resistance in the cookware generates heat, which cooks the food.
