Any connection which permits non potable water to enter a water distribution system. This is why irrigation systems have backflow preventers, in case the water system pressure is reduced by any malfunction, the possibly contaminated water standing on top of a sprinkler will not be drawn back into the drinking water system.
Cross connections in plumbing are any type of connection which is between the water and a source of contamination. This can cause the water supply to be contaminated.
Simple question complex answer - if the connection is electrical or electronic then the connection allows a flow of electricity from positive to negative. If the connection is engineering then the connection is because the connection is securely closed and locked
Connection interface consists of method for contacting a database . The connection object represents communication context.
Motor run delta connection because in delta connection it is less ampere needed and it sometimes it change the wye connection because of the available suply
Connection Database can be established using language such as Java. For that you need to create an object of Connection type.
what is a cross connection in plumbing
The duration of Cross Connection is 2.08 hours.
Cross Connection was created on 2009-05-01.
Cross Connection - 2009 is rated/received certificates of: India:U
A vent pipe is attached on top of a waste line NOT a cross connection A storm line connected into a soil or waste line NOT a cross connection A connection between potable water and water of unknown quality is a CROSS CONNECTION. Any fixture that is not protected by a vacuum breaker or AIR GAP or Air Break could allow a cross connection
Sort of... a cross-connection can easily occur in that situation. A cross-connection is technically when contaminated/polluted water backs up into the potable (clean) water supply.
A connection that crosses between two otherwise separate systems.
NO.
Commonly a FIBER cable will be used to do a vertical cross-connect.
Cross connections in plumbing are any type of connection which is between the water and a source of contamination. This can cause the water supply to be contaminated.
For a direct network connection between two devices you need a cross-over cable.
Between two structures, an anastomosis is a surgical connection.