if you want to measure a wide range of current, example 1mA to 200A (if the device is intended for the metering and protection), normally CT and rocoil is used together, it is difficult to make rocoil sensitive in range of 1mA, but you can do the task with the CT, but the same CT gets saturated above 5A, in that case rocoil start measuring, since rocoil is air core it wont saturate.
Chat with our AI personalities
AC current or DC current can be used in transformers. A transformer is made of two coils of wire, the input coil induces a current into the output coil. Transformers change the voltage either up (step up transformer) or down (step down transformer). The amount of change in voltage is dependent solely on the number of windings in both coils in the transformer. DC transformers work exactly the same way AC transformers do.
If I am not wrong then you have asked about a transformer. And its a current transformer. By theory of voltage transformer we know that Vs/Vp = Ns/Np So for answering your question we need the value of number of turns in primary and secondary coil. But you can use this equation to find your answer if you have other values. By using ohmic law you can convert voltage to current.
If a step-up transformer has 200 turns on the primary coil and 3000 turns on the secondary coil, with a primary coil voltage of 90 volts and current of 30 amps, then the turns ratio is 200:3000, so the secondary voltage is 1350 voltage and the available current is 2 amps. (This ignores losses through the transformer.)
The current flowing in the primary generates a magnetic field which induces a current in the secondary winding.AnswerNo current is induced into the secondary winding of a transformer. What is induced is voltage. Current will only flow in the secondary winding if it is connected to the load, and it is the load that determines the current, not the primary current.
You mean ac coil, the secondary coil, of a transformer? Then for the purpose of rectification, that is , for changing ac into dc, a diode is connected in series with the secondary coil of the transformer.