0
Add your answer:
Earn +20 pts
Does the output of a monostable multivibrator oscillate?
No, the output of monostable multivibrator does not oscillate. As it has only one stable output we do not get oscillations. We get a square wave as output.
How does schmitt trigger differ from bistable multivibrator?
Schmitt trigger refers to an input hysteresis mechanism to improve the noise tolerance of a digital input, preventing glitch generation or false triggering on outputs. A bistable multivibrator is a flipflop, a device capable of storing one bit.
What is astable?
An astable multivibrator [also known as an oscillator] is a circuit built so that it does not come to rest in one single state but switches between them continuously.
What is a one shot timer?
A one shot timer can be a great variety of many things. You could be referring to alcohol for example.
Is it possible to measure capacitance using only one 555 timer?
yes, it is possible to measure capacitance using only one 555 timer for it's monostable operation. When the output is high time is given by the equation t=1.1RC. From the output pulse measuring t(high) and then by measuring R we can calculate the capacitance.
What is the another name of monostable multivibrator?
Free-running or relaxationoscillators
Does the output of a monostable multivibrator oscillate?
No, the output of monostable multivibrator does not oscillate. As it has only one stable output we do not get oscillations. We get a square wave as output.
Difference between monostable multivibrator and astable multivibrator?
No, cant use bistable multivibrator in place of monostable multivibrator... because monostable is meant for one stable state and one unstable state.. so there will be a constant time period for the alternate pulses of output.. but in bistable multivibrator, both are stable states.. so there is no specific time period for the output pulses.. the state will vary only on the application of mannual trigger...
How can you apply monostable multivibrator in pulse control?
Monostable multi vibrator has got one stable state. Its pulse duration depends on the resistor and capacitor values used. By changing these values, the pulse duration can also be changed. Hence the circuit can be used for pulse control.
What are the differences between monostable and bistable multivibrators?
The bistable multivibrator, or flip-flop, will stay in one or the other state indefinitely, until it is told to change state. The monostable (or astable) multivibrator, or one-shot flip-flip, will stay in one state indefinitely, but once set to the other (triggered) state, it will remain there for only a certain time. There are two varieties. The non-retriggerable one-shot will generate a pulse of known width when triggered, and will complete its cycle no matter what the input does. The retriggerable one-shot will generate a pulse of variable width, minimum being the base time constant, and the pulse can be extended (retriggered) as desired.
How do you debounce a switch?
In a digital circuit probably the best way is with a monostable multivibrator, or one shot timer. The length of the timer should be made to be just a little longer than the bounce time of the switch. Ans2: My favourite is a 2 input NAND gate with both inputs connected to the switch, but with a small RC delay circuit in one of them.
What is Use of monostable multivibrator?
A partial clue to the answer is in its name, Monostable. i.e. it has one stable state.This is, in most monostables, a low, or "zero" state.When a monostable receives a trigger, it produces one output pulse, the width (duration) of which is determined by the suitable choice of associated components.Once the pulse has ended, the monostable returns to its stable state, ready to be triggered again.The most common use is for 'de-bouncing' switch contacts.Mechanical switches rarely make a clean contact first time. With modern high speed electronics, the 'crackle' from switch contacts can be detected as many separate presses of the switch. Follow the switch with a monostable and it will only detect one press over a short period of time.
How can you continuously generate a tone for a certain duration?
I would use two 555 timer ICs. Hook the first one up as a monostable multivibrator and the second as an astable multivibrator. The first one sets the length of duration and the second sets the frequency of the tone. Go to your local bookstore and get a copy of "IC Timer Cookbook" by Walter G. Jung. This is an excellent book and will describe the pinouts and methods of assembly.
What is IC555 timer in astable multivibrator?
The 555 multvibrator chip can be operated in monostable mode (one pulse at a time) Or in Astable mode (retriggers itself in freerun mode) This IC puts out a nice clean square wave . The output of this chip is capable of driving a small speaker.
What is the operation of the monostable multiviator circuit using 555?
The 555 timer is commonly used in IC electronics and in electronic circuits. In the monostable multivibrabor mode, the 555 works as a pulse generator. In astable mulitvibrator mode, the 555 is free running, and goes back and forth between frequencies.
The difference between a monostable and astable circuit?
The difference is in the name. "Mono" means one, so a monostable circuit is a circuit that is only stable in one state. An astable "A" means without... is a circuit that is not stable in any state. hope this helped!
What are the industrial applications of multivibrator?
This circuit is the vital heart of all digital electronics, computers, pulse-code telephony and so on. A multivibrator a.k.a. flip-flop, is a device which can settle in one of two stable states. They come in various flavours, single-shot or mono-stable, bi-stable. They are the basis of counting and time-code and so on.
