0
Add your answer:
Earn +20 pts
What size amp circuit breaker should be used for 110 outlet?
The size breaker you use is determined by the size wire used in the circuit. If you use AWG #12/2 wire then use a 20 amp breaker. If you use AWG # 14/2 then use a 15 amp breaker.
What size breaker should you use for a tnia-10 wire?
25 amp breaker
What size breaker do you need for two 60W bulbes 110 volts?
It is not the number of bulbs that you worry about. It is the wire size that is your concern. If the circuit is wired with AWG 12/2 wire then use a 20 amp breaker. If it is wired with a AWG 14/2 wire then use a 15 amp breaker. You are protecting the wiring with the correct size breaker.
How do you calculate power use for a home power generator?
Click the link. There you can figure the size generator you need.
Should 25 amps breaker be replaced by 20 amps?
For typical residential house wiring 12 AWG wire is required for a 20 Amp breaker. If you change out the breaker for a 25 A breaker you would have to rewire the circuit with 10 AWG. In that case you could up the breaker to 30 Amps. All outlets and switches should be rated at the same voltage and current as the breaker.
What type of oil is used in a Suzuki generator of 7500Watt?
Use 100% synthetic oil in the exact weight as recommended by the manufacture of the engine.
What size amp circuit breaker should be used for 110 outlet?
The size breaker you use is determined by the size wire used in the circuit. If you use AWG #12/2 wire then use a 20 amp breaker. If you use AWG # 14/2 then use a 15 amp breaker.
What size breaker should you use for a tnia-10 wire?
25 amp breaker
What is the size breaker per phase 200kva generator?
if you have 200 kva so it's 160 KW then ,you need 400 A MCCB and setting at 0.9 and use cable 4c.185 mm2 if the SMDB is nearby and all this will be change according to the ambient temperature and the electrical code used in your area
How big of breaker do you use for 115 volt?
Depends on the wire size used in the circuit. If you use AWG # 14 wire you must use a 15 amp breaker. If it is wired with AWG # 12 wire then you use a 20 amp breaker. If a AWG # 10 wire is used then a 30 amp breaker is required. The breaker protects the wiring from overheating so you must use the proper size breaker for the wire used.
What size breaker do you need for two 60W bulbes 110 volts?
It is not the number of bulbs that you worry about. It is the wire size that is your concern. If the circuit is wired with AWG 12/2 wire then use a 20 amp breaker. If it is wired with a AWG 14/2 wire then use a 15 amp breaker. You are protecting the wiring with the correct size breaker.
How do you calculate power use for a home power generator?
Click the link. There you can figure the size generator you need.
Will a 7500watt generator start a 2hp 15amp electric planer?
Use this formula W = A x V . Assuming that the saw is using 120 volts. 15 x 120 = 1800. Start up current on a motor will draw up to 300 % instantaneously so a 2000 watt generator might just do it. It would lug at the start but then catch up and run the saw. On motor from generator uses higher wattage is better.
Should 25 amps breaker be replaced by 20 amps?
For typical residential house wiring 12 AWG wire is required for a 20 Amp breaker. If you change out the breaker for a 25 A breaker you would have to rewire the circuit with 10 AWG. In that case you could up the breaker to 30 Amps. All outlets and switches should be rated at the same voltage and current as the breaker.
Generators for Home Use?
form_title= Generators for Home Use form_header= Keep power running with a generator. Have you ever owned a generator?*= () Yes () No What is your budget for a generator?*= _ [50] What size motor would you like for the generator?*= _ [50]
What size wire would you use on a 30amp breaker?
AWG # 10 wire.
What best breaker rating for 1.5 hp air-con unit?
The breaker you use is determined by the size of the wire in the wall not by what is being connected to that circuit. If you have 14/2 wire then use a 15 amp breaker. If you have 12/2 wire then use a 20 amp breaker. The breaker protects the wiring not the item connected.
