When a technician uses a voltmeter he or she can measure the power going through a circuit. It can test the safety and reliability of a an appliance also.
Another Answer
A voltmeter is used to measure the potential difference, or voltage, between conductors. To measure power (as mentioned in the original answer) you need a wattmeter, not a voltmeter.
positive terminal
when we connected voltmeter in series it takes large current and voltage and the resistance is considerably decreases.this is why we had connected voltmeter in series combination.
Red wire from a regular DC voltmeter should be connected to :
Ammeter is coneccted in series with circuit but Voltmeter is connected in parallel.
First you will need a constant current source. Do NOT connect the voltmeter to the constant current source without the resistor to be measured already connected. Do NOT use a battery, it is a voltage source. Then follow these steps to measure a resistor:connect the voltmeter across the resistor to be measuredconnect the voltmeter-resistor combination across the constant current sourceread the voltmeter and record the voltagedisconnect the voltmeter-resistor combination from the constant current sourcedisconnect the voltmeter from the resistorcalculate the resistance from the measured voltage and current from the source with Ohm's law in this form: R = V ÷ IIts much easier to just use the ohms setting on a multimeter.
A voltmeter will show the voltage on the rail and a technician will know how to use one.
what are the importance of photography to laboratory technology/ lab technician
No. Voltmeter in parallel. Ammeter in series.
It is a voltmeter which can only measure direct current.
A voltmeter measures voltage in volts.
You mean fastest? Digital voltmeter gives reading in seconds.
positive terminal
A voltmeter is a measuring instrument that is used in the measurement of the electric potential in volts.
why is extention
A voltmeter is a device used to measure the voltage in an electrical circuit. An example sentence would be: She went to the hardware store to purchase a voltmeter.
An electrodynamometer can work as a voltmeter by judging the wavelength and force of the electricity, much the same at the voltmeter, then converting it to a force that is more recognizable.
Any standard voltmeter but however the voltage to be measured must be stepped down to a safe value using a Potential transformer.