The excitation system is used to control the excitation of the rotating field in the armature. By increasing the armature current, it in turn increases the magnetic flux in the armature coil. This has the effect of increasing the voltage output of the generator. By lowering the armature current this in turn lowers the generator output voltage. The generator's voltage regulator automatically adjusts the output voltage continuously as the applied load on the generator changes.
Chat with our AI personalities
when excitation fails,Reactive power will be supplied by the system to which the generator is connected and generator will work as induction generator and its speed will rise a little. generator which was in over excitation mode will work in underexcitation.but there is under excitation limit which should not be reached so we should detect loss of excitation and trip generator
Over Excitation is a condition when the Excitation System is providing too much field current and as a result, the rotor of the generator will over heat. The Excitation System is equipped with an Over Excitation Limiter. This limiter acts to reduce the Excitation Current if this condition exists Underexcitation is a condition when the generator is not getting enough Excitation Current. If the generator does not get enough Excitation Current, it can be un-synchronized with the grid. We call this slipping a pole. If this occurs, the generator can be severely damaged. Kelly Thompson Engineering Lead Siemens Energy Alpharetta GA
the voltage which is given for creating magnetic field in a generator is known as excitation voltage.
when the current is passing through the winding then it is called "Excitation". Types of excitation (1)seperately excited generator. (2)self excited generator. self generator is classified into 3 types. 1.shunt generator. 2.series generator. 3.compound generator. compoud generator is again classified into 2 types. 1.short shunt generator. 2.long shunt generator.
A loss of field relay.