0
Add your answer:
Earn +20 pts
What is the difference between a high frequency UPS and a Low frequency UPS?
The difference is in sine wave generation algorithm. In HI freq - it is 30kHz signal, modulated by 50Hz.
What is the difference between rectangular and square wave?
Well, in signal processing it means to be the same most of the time. But if someone asks you to distinguish between these two, it merely means in a square wave uptime and downtime of voltage is the same whereas in a rectangular wave uptime is different from the downtime.
What is difference between modulated wave and carrier wave?
Carrier Wave: A carrier wave is a high-frequency electromagnetic wave that is used as the "carrier" or the base signal in a modulation process. It is typically a pure sine wave with a constant frequency and amplitude. The carrier wave by itself does not carry any information; it serves as a vehicle to carry the information from one location to another. In AM and FM radio broadcasting, the carrier wave is the primary signal transmitted by the radio station. Modulated Wave: A modulated wave is the result of combining the carrier wave with an information signal, such as an audio signal or data. Modulation is the process of varying the characteristics of the carrier wave (either its amplitude or frequency) in accordance with the information signal. There are two common types of modulation: Amplitude Modulation (AM) and Frequency Modulation (FM). In AM, the amplitude of the carrier wave is varied in proportion to the amplitude of the information signal. This variation encodes the information onto the carrier wave. In FM, the frequency of the carrier wave is varied in proportion to the amplitude of the information signal. This variation encodes the information onto the carrier wave. The modulated wave contains the information that needs to be transmitted, and it can be demodulated at the receiving end to retrieve the original information.
What is the difference between a resonant and a non-resonant circuit?
When a circuit is said to be resonate it means a signal or wave that is being generated has some relationship with a reflected or feedback signal such that the generated signal is reinforced with the reflected or feedback signal. This reinforcing of the signal may cause a standing wave of constructive interference and required the generation of the signal and the reflection or feed back to be in phase or Coherent. if there is no phase coherency then it can be harder to achieve the standing wave of constructive interference. However is the Phase is detected and delay is compensated it can be achieved like in a laser ring gyro, which uses two resonate cavities that have there path length adapted to cope with heat expiation.
Which is more reasonable using a sine wave or square wave signal to determine slew rate?
It is more reasonable to use square wave rather than sine wave signal to determine slew rate. Both signal sources serve as a functional generator with the sine wave providing high purity waves.Ê
What is the difference between signal and wave?
wave is a part of a signal . millions of wave construct a signal .
Difference between square wave and digital signal?
A: square wave can be positive and or negative. A digital signal is a square wave but it can be of invariable duty cycles
What is phase discriminator?
A phase discriminator is a circuit or device used to compare the phase difference between two input signals. It is often used in communication systems to demodulate or recover the original signal from a modulated carrier wave by detecting the phase difference between the carrier wave and the modulated signal.
What is the difference between a high frequency UPS and a Low frequency UPS?
The difference is in sine wave generation algorithm. In HI freq - it is 30kHz signal, modulated by 50Hz.
What is difference between pulse and square wave?
A pulse wave is a waveform where the signal switches between high and low levels at a consistent frequency, creating pulses of varying widths. A square wave is a type of pulse wave where the signal switches abruptly between two levels (high and low) at a fixed frequency, with the width of the pulses remaining constant.
What is difference between vga and lcd display?
The main difference between the tow is the signal. VGA uses an analog signal and DVI is a digital signal.
What is difference between lifi and wifi?
In wifi, modulated signal is radio wave where as life modulated signal is light. It is visible electromagnetic spectrum and has higher bandwidth than wifi but has Line of sight limitation.
What is the difference between rectangular and square wave?
Well, in signal processing it means to be the same most of the time. But if someone asks you to distinguish between these two, it merely means in a square wave uptime and downtime of voltage is the same whereas in a rectangular wave uptime is different from the downtime.
Is there any difference between an analog signal and a wave signal?
A Digital Signal can have one of two values, 1 or 0. An Analogue signal can have any value between 1 and 0. Digital signals are better for sending information as if the signal is somewhat distorted, it is still easily recognisable. Vinyl Record use analogue. Cds use Digital
What is the difference between signal processing and signal conditioning?
processing is nothing
What is the difference if any between the demodulator part of a modem and coder part of a codec?
A coder can accept any kind of analog signal while demodulator can only accept a modulated sine wave. Then they generate the digital signal.
What is the difference if any between the demodulator part of a modem and the coder part of a codec?
A coder can accept any kind of analog signal while demodulator can only accept a modulated sine wave. Then they generate the digital signal.
