0
a 7408 ic chip is a quadruple, 2 input AND Gate chip. These chips have 14 pins. Pin 7 is gnd and pin 14 is vcc. In principle, an AND Gate is just that. A gate that is Active high. To get an active high output, you must have both inputs active high. 5 volts on each input will give you a 5 volt output. These IC chip use TTL (transistor-transistor logic). They are obsolete and are no longer used in todays electrical circuits. Most electronic systems use a large CPLD, Complex Programmable Logic Device, that can be used to implement digital logic designs that contain 20,000 or fewer gates. Texas Instruments poineered the TTL 7408 IC chip. CPLD boards are commonly made by a company named Altera
Still curious? Ask our experts.
Chat with our AI personalities
Maxine
Devin
Renea 7408 ic chip is a quadruple, 2 input AND Gate chip. These chips have 14 pins. Pin 7 is gnd and pin 14 is vcc. In principle, an AND Gate is just that. A gate that is Active high. To get an active high output, you must have both inputs active high. 5 volts on each input will give you a 5 volt output. These IC chip use TTL (transistor-transistor logic). They are obsolete and are no longer used in todays electrical circuits. Most electronic systems use a large CPLD, Complex Programmable Logic Device, that can be used to implement digital logic designs that contain 20,000 or fewer gates. Texas Instruments poineered the TTL 7408 IC chip. CPLD boards are commonly made by a company named Altera
Add your answer:
Earn +20 pts
What is the name of 7408 ic?
It is IC for logic AND gate.
Can you use ic 7485 as 8bit comparator?
use two of them for 8 bits.
What is the use of ic 7806?
IC 7806 is the voltage regulator that gives 6V dc voltage from 230V ac power supply. It is used to give power supply to the IC which operates on 6V.
What is the use of IC 741?
pin1to 8 is used in ic741
Why you use capacitors before and after regulator ICs in a voltage supply circuit?
The capacitor before the IC is filtering the output of the rectifier, so that the minimum voltage dip between diode conduction cycles is greater than the minimum voltage the IC requires. The capacitor after the IC is stabilizing the IC, by preventing it from oscillating, and responding to quick changes in load faster than the IC can.
