Fast RF is a type of radio frequency transmission for sending data from a wireless input device (e.g. a cordless mouse) to a computer via attached receiver. Theoretically, Fast RF can be done at different transmission frequencies (i.e. the size of the radio wave, e.g. 2.4 gHz, etc.) but its main aspect is that it transmits data 125 times per second, much faster than wireless technologies prior to the creation of Fast RF standards. A standard USB port cannot read/understand more than 125 transmissions, so fast RF is as fast as it can handle (I presume USB 2.0 can go faster, as it's higher bandwidth, but don't know for sure). Short and sweet, if you want a wireless mouse and are using a USB 1 port or hub, Fast RF is as good as you'll see so far as speed is concerned, because it matches the maximum data rate of the USB port.
What is rf transmitter
If=lo-rf
RF Loop Back ,Usually used in all RF Transceivers to covert the Transmitted signal into the Receiver frequency ,checking the Overall performance of the Terminal .This is an Option useful only in maintenance and not recommended BY Standard Authorities (Fcc, ETSI, etc )
Depending on how it is used, it can have different applications. However, RF scanning is where one runs a receiver through a series of radio frequencies (RF), and tries to identify a specific frequency. It can include illegal operations, such as RF scanning wherein a transmitter is used to transmit a scan to interfere with transmitters such as petrol pumps, or scanning to locate cell or wireless telephone transmissions. Or there can be harmless applications such as simply tuning a radio manually.
RF (Radio Frequency Coil) is a coil, which is designed to resonate at a frequency some where in the radio spectrum frequency. See L C Circuit Link Below.
Rf is about .45
wt is RF SURVEY?
What is rf transmitter
rf
RF = Radio Frequency
CAPM equation E(Rj) = rf + b[E(Rm) - rf] 0.14 = rf + 1.5(0.12-rf) 0.14 = rf + 0.18 - 1.5rf -0.04 = rf - 1.5rf -0.04 = (1-1.5)rf -0.04 = -0.5rf rf = 0.08 rf = 8%
RF Online happened in 2005.
RF Online was created in 2005.
RF Generation was created in 2004.
Yes, a modulator is required if you use a RF cable to connect it to the TV.
you can get either blue tooth or RF
Because RF does not require line-of-sight.