It was mentioned that there are two different ways to connect two or more electrical devices together in a circuit. They can be connected by means of series connections or by means of parallel connections. When all the devices in a circuit are connected by series connections, then the circuit is referred to as a series circuit. When all the devices in a circuit are connected by parallel connections, then the circuit is referred to as a parallel circuit. A third type of circuit involves the dual use of series and parallel connections in a circuit; such circuits are referred to as compound circuits or combination circuits. The circuit depicted at the right is an example of the use of both series and parallel connections within the same circuit. In this case, light bulbs A and B are connected by parallel connections and light bulbs C and D are connected by series connections. This is an example of a combination circuit
By Engineer
Muhammad Zaheer Meer GMS
Chat with our AI personalities
A route for the flow of electricity that has elements of both series and parallel circuits.
Depending on the circuit, typically a combination of a coil (commonly called a choke) and a capacitor can be put in circuit at multiple places to significantly reduce noise in a circuit.
because it is situated on the silicon board with resistors ,transistors and wires.These three things organize electrical circuit.Integrated = mixed or combined (same usage as "integrated school" in civil rights).Circuit = electronic circuit.Integrated Circuit = combination of a variety of components into one inseparable circuit.There are 2 types of integrated circuits:Hybrid integrated circuit = ceramic printed circuit board with ultra-miniaturized components soldered to the padsMonolithic integrated circuit = one piece (i.e., single stone) circuit made of silicon (or other semiconductor crystal) with all the different types of components part of that crystal (and layers of metal plated on it to connect components)
Answer:A given combination of R,L and C in series allows the current to flow in a certain frequency range only.For this reason it is known as an acceptor circuit i.e.,it accepts some specific frequencies....
Remote-Control Circuit. Any electrical circuit that controlsany other circuit through a relay or an equivalent device.
when a light is on it is part of a scolde circuit